Color Printer User Manual
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
Dell Printer Configuration Web Tool 181
E-Mail Alert Setup Page
Purpose:
To verify the current settings of SMTP/POP (Simple Mail Transfer
Protocol/Post Office Protocol) used for the e-mail feature and E-Mail Alerts
feature. In this page, you can only verify the settings of items. If you want to
change the settings, go to the pages in the Print Server Settings tab.
Val u e s:
IPsec Settings Protocol Displays the protocol status.
IKE Displays IKE authentication.
802.1x
*1
Enable IEEE
802.1x
Displays the status of IEEE 802.1x.
Authentication
Method
Displays the setting of authentication method for
IEEE 802.1x.
IP Filter
(IPv4)
*8
Access List Displays the list of IP addresses that are permitted
or denied access to the printer.
*1
This item is available only when the printer is connected using LAN cable.
*2
This item is available only when the printer is connected using the wireless network
*3
This item is displayed when IPv4 Mode is selected.
*4
This item is displayed when IPv6 Mode is selected.
*5
This item is displayed only when Use Manual Address is set to Enable.
*6
This item is displayed only when an IP address has been assigned.
*7
This item is available only when using IPv6 dual mode.
*8
This item is available only for LPD or Port9100.