Color Printer User Manual
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
184 Dell Printer Configuration Web Tool
NOTE: The settings in the Port Settings page will be valid only when the printer
is rebooted. When you change or configure the settings, click the Apply New
Settings button to apply the new settings.
Ethernet
*1
Ethernet
Settings
Auto Detects the Ethernet
transmission rate and the duplex
settings automatically.
10BASE-T Half-
Duplex
Selects 10Base-T Half-Duplex
as the default value.
10BASE-T Full-
Duplex
Selects 10Base-T Full-Duplex
as the default value.
100BASE-TX
Half-Duplex
Selects 100Base-TX Half-
Duplex as the default value.
100BASE-TX
Full-Duplex
Selects 100Base-TX Full-
Duplex as the default value.
1000BASE-T
Full-Duplex
Selects 1000Base-T Full-
Duplex as the default value.
Current Ethernet Settings Displays the current settings of
the Ethernet.
MAC Address Displays the MAC address of
the printer.
Port Status LPD Sets whether to enable LPD.
Port9100 Sets whether to enable Port9100.
IPP Sets whether to enable IPP.
WSD Sets whether to enable WSD.
SMB Sets whether to enable SMB.
Bonjour
(mDNS)
Sets whether to enable Bonjour (mDNS).
E-Mail Alert Sets whether to enable E-Mail Alert.
Telnet Sets whether to enable Telnet.
SNMP Sets whether to enable SNMP.
LLTD Sets whether to enable LLTD.
*1
This item is available only when the printer is connected using LAN cable.