Color Printer User Manual
Table Of Contents
- Dell™ 2150cn/2150cdn Color Printer
- User's Guide
- Before Beginning
- Setting up the Printer (Printer Setup)
- Preparing Printer Hardware
- Installing Optional Accessories
- Connecting Your Printer
- Setting the IP Address
- Loading Paper
- Installing Printer Drivers on the Windows Computers
- Installing Printer Drivers on the Macintosh Computers
- Installing Printer Drivers on the Linux Computers (CUPS)
- Using Your Printer
- Dell Printer Configuration Web Tool
- Print Media Guidelines
- Loading Print Media
- Operator Panel
- Printing
- Know Your Printer
- Understanding the Tool Box Menus
- Understanding the Printer Menus
- Understanding Your Printer Software
- Understanding Fonts
- Understanding Printer Messages
- Printing With Web Services on Devices (WSD)
- Specifications
- Maintaining Your Printer
- Maintaining Your Printer
- Removing Options
- Clearing Jams
- Troubleshooting
- Troubleshooting Guide
- Basic Printer Problems
- Display Problems
- Printing Problems
- Print Quality Problems
- The output is too light
- Toner smears or print comes off
- Random spots/Blurred images
- The entire output is blank
- Streaks appear on the output
- Part or the entire output is black
- Pitched color dots
- Vertical blanks
- Ghosting
- Light-induced fatigue
- Fog
- Bead-Carry-Out (BCO)
- Jagged characters
- Banding
- Auger mark
- Wrinkled/Stained paper
- Damage on the leading edge of paper
- Jam/Alignment Problems
- The top and side margins are incorrect
- Color registration is out of alignment
- Images are skewed
- Standard 250-Sheet Tray Misfeed Jam
- SSF Misfeed Jam
- Optional 250-Sheet Feeder Misfeed Jam
- Regi Jam (Exit Sensor On JAM)
- Exit Jam (Exit Sensor Off JAM)
- Standard 250-Sheet Tray/Optional 250-Sheet Feeder Multi-feed Jam
- SSF Multi-feed Jam
- Noise
- Problems With Installed Optional Accessories
- Other Problems
- Contacting Service
- Troubleshooting Guide
- Appendix
- Index
356 Understanding Printer Messages
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_SFP_UG_FM\Mioga_SFP_UG_FM\section22.fm
DELL CONFIDENTIAL – PRELIMINARY 9/13/10 - FOR PROOF ONLY
004-310 Turn off the printer. Confirm that the optional 250-sheet feeder is
correctly installed, and turn on the printer. Contact customer support if
this failure is repeated.
004-311 Turn off the printer. Confirm that the duplexer is correctly installed, and
turn on the printer. Contact customer support if this failure is repeated.
004-312 Turn off the printer, and turn it on again. Contact customer support if this
failure is repeated.
009-360 Turn off the printer. Confirm the yellow cartridge is correctly installed,
and turn on the printer. Contact customer support if this failure is
repeated.
009-361 Turn off the printer. Confirm the magenta cartridge is correctly installed,
and turn on the printer. Contact customer support if this failure is
repeated.
009-362 Turn off the printer. Confirm the cyan cartridge is correctly installed, and
turn on the printer. Contact customer support if this failure is repeated.
009-363 Turn off the printer. Confirm the black cartridge is correctly installed, and
turn on the printer. Contact customer support if this failure is repeated.
010-317 Turn off the printer and wait for 30 minutes. Open the front cover and
make sure that the fuser is fully installed.
010-377 Turn off the printer. Confirm that the fuser is correctly installed, and turn
on the printer. Contact customer support if this failure is repeated.
016-316 Turn off the printer. Remove the optional 512 MB memory module from
the slot, and then reattach it firmly. Turn on the printer. Contact customer
support if this failure is repeated.
016-317 Turn off the printer, and turn it on again. Contact customer support if this
failure is repeated.
016-318 Remove the unsupported additional memory module. Contact customer
support if this failure is repeated.
016-386 Turn off the printer, and turn it on again. Contact customer support if this
failure is repeated.
016-387
016-388
016-391 Turn off the printer, and turn it on again. Contact customer support if this
failure is repeated.
016-392
016-393
016-394