Instruction Manual

Active
Mode
Reject
Rejects printing from specified network address.
Permit
Permits printing from specified network address.
Disabled
Disables the IP Filter feature for the specified IP address.
*1 An optional multi protocol card is required to display the item.
*2 This item is only available for LPD or Port9100.
NetWare
Purpose:
To configure detailed settings for IPX/SPX and NetWare.
Values:
IPX/SPX
Settings
Frame
Type
Auto
Specifies the active frame type automatically.
Ethernet II
Selects Ethernet II frame type.
Ethernet
802.3
Selects IEEE802.3 frame type.
Ethernet
802.2
Selects IEEE802.2 frame type.
Ethernet
SNAP
Selects SNAP frame type.
Current Frame Type
Displays the current frame type.
Network Address
Displays the IPX network address.
NetWare
Device Name *
1
Specifies the printer name up to 47 alphanumeric characters.
For PServer Mode, set the Print Server Name (Print Server Object
Name). The original setting remains valid if no input is made.
Active
Mode
Directory:
PServer
Mode
Selects this option when using in Directory: PServer Mode .
Bindery:
PServer
Mode
Selects this option when using in Bindery: PServer Mode .
Tree Name *
1
Specifies the tree name up to 32 alphanumeric characters.
Configure this item only when Directory: PServer Mode is
selected.
Context Name
Specifies the context name of the Print Server Object up to 255
alphanumeric characters. Configure this item only when
Directory: PServer Mode or Directory: RPrinter Mode is
selected.