User's Manual

*
1
This item is available only when the RAM disk is on or the optional hard disk is installed.
Printer Settings
The Printer Settings tab includes System Settings, Parallel Settings, Network Settings, USB Settings, PCL
Settings, PS Settings, and Secure Settings pages.
System Settings
Purpose:
To configure the basic printer settings.
Values:
Power Saver
Time-Sleep
Sets the time for transition to the power saver mode (Sleep).
Power Saver
Time-Deep Sleep
Sets the time for transition to the power saver mode (Deep Sleep).
Control Panel
Tone
Specifies whether to enable the tone that is emitted when the operator panel input is correct.
Invalid Key Tone Specifies whether to enable the tone that is emitted when the operator panel input is incorrect.
Machine Ready
Tone
Specifies whether to enable the tone that is emitted when the printer becomes ready.
Job Completed
Tone
Specifies whether to enable the tone that is emitted when a print job is complete.
Fault Tone Specifies whether to enable the tone that is emitted when a job ends abnormally.
Alert Tone Specifies whether to enable the tone that is emitted when a problem occurs.
Out of Paper
Alert Tone
Specifies whether to enable the tone that is emitted when the printer runs out of paper.
Low Toner Alert
Tone
Specifies whether to enable the tone that is emitted when toner or some other consumable is low.
Base Tone
Specifies whether to enable the tone that is emitted when the operator panel screen returns to the
default by scrolling the loop menu.
Fault Time-Out
Specifies in seconds the amount of time the printer should cancel for a job stops abnormally. The
print job is cancelled if the time-out time is exceeded.
Job Time-Out
Specifies in seconds the amount of time the printer should wait for data to arrive from the
computer. The print job is cancelled if the time-out time is exceeded.
Panel Language Sets the language to be used on the operator panel.
Auto Log Print Specifies whether to automatically print a log of completed jobs after every 20 jobs.
Print ID Specifies where to print the user ID on the output paper.
Print Text
Specifies whether the printer outputs PDL data, which is not supported by the printer, as text
when the printer receives it.
Banner Sheet
Insert Position
Specifies where to insert a banner sheet.
Banner Sheet
Specify Tray
Specifies which input tray to use to insert a banner sheet.
RAM Disk*
1
Specifies the amount of memory allocated for the file system, Secure Print and Proof Print
features.
Substitute Tray
Specifies whether or not to use another size paper when the paper that is loaded in the specified
tray does not match the paper size settings for the current job.
mm / inch Specifies the measurement unit to be used on the operator panel screen as either mm or inches.
Letterhead
Specifies that duplex printing is selected for two-sided letterhead media.