User's Manual

WSD
Receive
Time-Out
Sets the receive time-out period from 1 to 65,535 seconds.
Notification
Time-Out
Sets the notification time-out period from 1 to 60 seconds.
Maximum
Number of
TTL
Sets the maximum number of TTL from 1 to 10.
Maximum
Number of
Notification
Sets the maximum number of notifications from 10 to 20.
FTP
Password Sets the password for FTP.
Re-enter
Password
Enter the password again to confirm it.
Connection
Time-Out
Sets the connection time-out period from 1 to 1000 seconds.
HTTP
Port Number Sets the port number to 80 or from 8000 to 9999.
Simultaneous
Connections
Displays the maximum number of connections received simultaneously by the client.
Connection
Time-Out
Sets the connection time-out period from 1 to 255 seconds.
Telnet
Password Sets the password for Telnet.
Re-enter
Password
Enter the password again to confirm it.
Connection
Time-Out
Sets the connection time-out period from 1 to 1000 seconds.
NetWare
Purpose:
To configure detailed settings for NetWare.
Values:
NetWare
Device
Name
Specifies the printer name up to 47 alphanumeric characters.
For PServer Mode, set the Print Server Name (Print Server Object Name). The original setting
remains valid if no input is made.
Active Mode
Directory: PServer Mode Selects this option when using in Directory: PServer Mode.
Bindery: PServer Mode Selects this option when using in Bindery: PServer Mode.
Tree Name
Specifies the tree name up to 32 alphanumeric characters. Configure this item only when
Directory: PServer Mode is selected.
Context
Name
Specifies the context name of the Print Server Object up to 255 alphanumeric characters.
Configure this item only when Directory: PServer Mode is selected.
Polling
Interval
Sets the time interval from when print data enters the print queue until printing starts. The
setting range is from 1 to 1000 seconds. The original setting remains valid if no input is
made. Configure this item only when Bindery: PServer Mode or Directory: PServer Mode
is selected.
Password
Sets the print server password up to 32 alphanumeric characters. Configure this item only
when Bindery: PServer Mode or Directory: PServer Mode is selected.
Re-enter
Password
Enter the password again.
Status
Information
Displays the status of NetWare.
SLP
Active
Discovery
Select the check box to enable Active Discovery.