User's Manual

To specify the server authentication type, the server response time-out, or the search time-out.
Values:
Authentication
System Settings
Select the authentication system from the list.
Server Response
Time-Out
Specifies the amount of time the printer should wait for response from the server. Sets the
time period from 1 up to 75 seconds.
Search Time-Out
Specifies the amount of time the printer should wait for searching for the server. Sets the
time period from 5 up to 120 seconds.
Kerberos Server
Purpose:
To specify the settings for the Kerberos Server.
Values:
Primary Server Name / IP
Address & Port
Sets the primary server name or IP address, and the port address. The port
address must be 88 or between 5,000 and 65,535.
Secondary Server Name /
IP Address & Port
Sets the secondary server name or IP address, and the port address. The port
address must be 88 or between 5,000 and 65,535.
Domain Name Enter the domain name.
LDAP Server
Purpose:
To specify the settings of the LDAP server.
Values:
Server
Information
IP Address / Host
Name & Port
Sets IP address or the host name, and the port address. The port address must
be 389, 636 or between 5,000 and 65,535.
Backup IP Address /
Host Name & Port
Sets backup IP address or the host name, and the port address. The port
address must be 389, 636 or between 5,000 and 65,535.
LDAP Server Displays the current software information of the LDAP server.
Operation
Information
Search Directory
Root
Enter the search directory root.
Login Name Enter the login name of the administrator.
Password
Enter the administrator password using 1 to 127 alphanumeric characters. If
the password is left blank (NULL), you cannot log in to a server.
Re-enter-Password Enter the administrator password again to confirm it.
Search
Time-Out
Select Wait LDAP Server Limit and the specified wait time. The specified wait
time must be between 5 and 120 seconds.
LDAP Authentication
Purpose:
To specify the LDAP server authentication method.
Values:
Authentication Method Shows the authentication method.
Use Added Text String Select whether to use the added text string from the list.