User's Manual

Back to Contents Page
Printer Settings
Printing a Printer Settings Page
Using the Operator Panel to Change Printer Settings
Using the Dell Printer Configuration Web Tool to Change Printer Settings
Resetting Defaults
You can change most printer settings from your software program. If your printer is attached to the network, you can
change settings from the Dell
™
Printer Configuration Web Tool. To launch the Dell Printer Configuration Web Tool,
type the printer's IP address in your web browser. To find your printer's IP address, see "
Printing a Printer Settings Page."
Settings from the software program update the default printer settings for the printer. Settings from the printer driver
only apply to the job you are sending to the printer.
If you cannot change a setting from your software program, use the operator panel or the Dell Printer Configuration
Web Tool. Changing a printer setting from the operator panel or the Dell Printer Configuration Web Tool makes that
setting the user default.
Printing a Printer Settings Page
You can verify the detailed printer settings by printing a printer settings page.
When Using the Operator Panel
1. Press Menu button.
2. Ensure Report/List is highlighted, and then press
(Set) button.
3. Printer Settings is displayed. Press
(Set) button.
The printer settings page is printed.
When Using the Dell™ Printer Configuration Web Tool
1. Launch Dell Printer Configuration Web Tool.
a. Open the web browser.
b. Enter the IP address of your printer in the web browser.
See "
Dell Printer Configuration Web Tool."
2. Select Printer Settings.
3. Click the Printer Settings Report tab.
4. Select Reports.
5. Click the Start button in the Printer Settings.
The printer settings page is printed.
Using the Operator Panel to Change Printer Settings