User's Manual

1. Press Menu button.
2. Ensure Report/List is highlighted, and then press
(Set) button.
3. Printer Settings is displayed. Press
(Set) button.
The printer settings page is printed.
Resetting Defaults
After executing this function and rebooting the printer, all the menu parameters, except the parameters for the network,
are reset to their default values.
When Using the Operator Panel
1. Press Menu button.
2. Press button until Admin Menu is highlighted, and then press (Set) button.
3. Press button until Maintenance is highlighted, and then press (Set) button.
4. Press button until Reset Defaults is highlighted, and then press (Set) button.
5. Start or Cancel message appears on the operator panel. Press (Set) button.
6. Turn off the printer, and then on again to apply the settings.
When Using the Dell™ Printer Configuration Web Tool
1. Launch Dell Printer Configuration Web Tool.
a. Open the web browser.
b. Enter the IP address of your printer in the web browser.
See "
Dell Printer Configuration Web Tool."
2. Select Printer Settings.
3. Click the Printer Maintenance tab.
4. Select Reset Defaults from the list at the left side of the page.
The Reset Defaults page is displayed.
5. Click Start next to Reset Defaults and restart printer to reset to default values.
The printer is turned off automatically to apply the settings.
Initializing NVRAM for Network Settings
You can initialize the IP address and network-related settings by initializing NVRAM for Network settings.
1. Press Menu button.
2. Press
button until Admin Menu is highlighted, and then press (Set) button.