User's Manual

ManualsBrandsDell ManualsPrinters5130cdn Color Laser Printer

201

202

203

204

205

206

207

208

209

210

Proof Print

Purpose:

To specify printing and deleting the stored document.

Values:

Select User

Enter the password you specified on the printer driver.

All

Document

Print and Delete Deletes all documents from print memory after printing them.

Print Prints all documents and save them in memory.

Delete Deletes all documents from print memory.

document n

(n is number)

Print and Delete Deletes the specified document from print memory after printing it.

Print Prints the specified document and save it in memory.

Delete Deletes the specified document from print memory.

Panel Lock

This feature prevents unauthorized personnel from changing settings made by the administrator. For regular printing,

items can be selected from the menu and printer settings remain unchanged. For regular printing, items can be

configured using the printer driver.

NOTE: Disabling the operator panel menus does not prevent access to the Stored Print and Tray Settings menus.

Enabling the Panel Lock

1. Press Menu button.

2. Press

button until Admin Menu is highlighted, and then press (Set) button.

3. Press

button until Panel Settings is highlighted, and then press (Set) button.

4. Panel Lock is displayed. Press

(Set) button.

5. Press

button until Enable is highlighted, and then press (Set) button.

6. Enter the new password, and then press

(Set) button.

7. Re-enter the password to confirm the password that you entered, and then press

(Set) button.

The password has been changed.

NOTE: If you forget your password, turn off the printer. Then, while holding Menu button, turn on the printer.

Perform steps 6 to 7 to reset the password. This will recover the factory default panel password.

NOTE: If you change the password while Panel Lock is Enable, follow the following steps. Perform steps 1 and 2.

Press

button until Change Password is highlighted, and then press (Set) button. Perform steps 6 and 7 to

change the password. This will change the password.

NOTE: If Panel Lock is Enable, the factory-default panel password is 0000.