User's Manual

Back to Contents Page
Printing Using ColorTrack (External Authentication)
ColorTrack Settings
Setting the Printer Driver
With ColorTrack, you can restrict the number of pages that can be printed per user, specify the users who can print in
color, and restrict the users who can access the printer, based on the user information registered on the external
authentication server or the printer.
To print using ColorTrack, you must set ColorTrack Settings and the printer driver. Also, you must set the external server
with ColorTrack for using an external authentication server. To set the external server, consult your system administrator.
ColorTrack Settings
To print using ColorTrack, configure the following settings.
"Dell ColorTrack"
"Authentication System"
"Kerberos Server"
"LDAP Server"
"LDAP Authentication"
Dell ColorTrack
Specify the authentication method.
When Using the Dell™ Printer Configuration Web Tool
1. Launch Dell Printer Configuration Web Tool.
a. Open the web browser.
b. Enter the IP address of your printer in the web browser.
See "
Dell Printer Configuration Web Tool."
2. Select Print Volume.
3. Click the Dell ColorTrack tab.
Select External Mode for ColorTrack Mode.
Check the No Account User Print check box when you permit the printing of data with no authentication
information. If not, remove the check mark from the No Account User Print check box.
Enter the password when the No Account User Print check box is On and External Mode is selected.
Then, re-enter the password to confirm the password that you entered.
Check the ColorTrack Error Report check box, if necessary.
4. Click the Apply New settings button, and then turn off the printer to apply the settings.