User's Manual

Specifies letterhead duplex mode settings.
When letterhead duplex mode is enabled, a print sheet is always fed through duplex feeding path in a
printer. As the result, a user can set sheets without caring about sheet orientation in an input slot.
Available Letterhead duplex mode values are as follows:
0
Off
1
On
2
Auto
-y tr=mode
Specifies trapping settings.
Available trapping option values are as follows:
0
Off
1
On
-y -hld=PrintType:UserID:Password:DocumentName
Specifies the print type.
Available types of setting are as follows:
For Secure Print
secure:UserID:Password:DocumentName
secure:UserID:Password:
For Private MailBox Print
private:UserID:Password:DocumentName
private:UserID: Password:
For Public MailBox Print
public:UserID::DocumentName
public:UserID::
For Proof Print
proof:UserID::DocumentName
proof:UserID::
For UserID, enter an ID up to eight single-byte characters from 0x20 to 0x7E, except 0x20 " "(blank)
and 0x3A":" (colon).
For Password, enter a password up to 12 single-byte characters from 0x30 to 0x39 (numeric
characters).
For DocumentName, enter a document name up to 12 single-byte characters from 0x20 to 0x7E, except
0x20 " " (blank) and 0x3A":" (colon).
NOTE: When document name is not specified, the original document name will be used.
-y -Jown= jobownername: Password: jobgroupname
Specifies job owner name, password and job group name for authentication.
Available types of setting are as follows:
jobownername:password:jobgroupname
jobownername:password:
jobownername::
:password: