User's Manual
the Paper Tray Configuration.
2. Click Apply, and then click OK.
3. Close the Printers and Faxes dialog box.
Windows 2000
1. Click Start® Settings® Printers.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm the paper tray configuration
under Installable Options.
6. Close the Printers dialog box.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select any of the available trays from
the Paper Tray Configuration.
2. Click Apply, and then click OK.
3. Close the Printers dialog box.
Mac OS
®
X 10.5.x
1. Select the Print & Fax in System Preferences.
2. Select the printer in Printers list, and click Options & Supplies.
3. Select Driver, select the options that have been installed on the printers, and
then click OK.
Mac OS X 10.3.x/10.4.x 1. Select the printer from the Printer List screen in Print Center (or Printer
Setup Utility).
2. Click Printers on the Print Center (or Printer Setup Utility) menu bar, and
select Show Info.
3. Select Installable Options, and select the options that have been installed on
the printer, and then click Apply Changes.
Mac OS 9 1. Select a desktop printer related to the model.
2. Click Printing on the System menu bar, and select Change Setup.
3. Select Paper Tray Configuration on the Change menu.
4. Select the option that has been installed on the printer on the To menu, and
then click OK.
Installing both 550-Sheet Feeders and 1100-Sheet Feeder
1. Turn off the printer and unplug the power cable. Then, disconnect all cables from the back of the printer.
2. Lock down the brakes of the two casters at the front of optional 1100-sheet feeder.
CAUTION: Failure to lock down the brakes can cause the printer to move unexpectedly, resulting in
personal injury.
NOTE: For easier and safer locking, make the brakes of the two casters face forward by pushing the 1100-sheet
feeder backward.
3. Pull out the tray until it stops. Lift the front slightly and remove it.
4. Lift the 550-sheet feeder and align the three guide pins of the 1100-sheet feeder with the holes at the bottom of
the 550-sheet feeder.
When lifting the 550-sheet feeder, grasp it as shown in the illustration.