User's Manual

This option is available only when the optional output expander is installed.
-Lh=mode
Specifies letterhead duplex mode settings.
When letterhead duplex mode is enabled, a print sheet is always fed through duplex feeding path in a printer. As
the result, a user can set sheets without caring about sheet orientation in an input slot.
Available Letterhead duplex mode values are as follows:
0
Off
1
On
2
Auto
-Tr=mode
Specifies trapping settings.
Available trapping option values are as follows:
0
Off
1
On
-Hld=PrintType:UserID:Password:DocumentName
Secure Print
PrintType
secure
Secure Print
private
Private MailBox Print
public
Public MailBox Print
proof
Proof Print
UserID
Up to eight single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A":" (colon).
Password
Up to 12 single-byte characters from 0x30 to 0x39 (numeric characters).
DocumentName
Up to 12 single-byte characters from 0x20 to 0x7E, except 0x20 " " (blank) and 0x3A ":" (colon).
Secure Print
-Hld=secure:UserID:Password:DocumentName
-Hld=secure:UserID:Password:
Private MailBox Print
-Hld=private:UserID:Password:DocumentName
-Hld=private:UserID:Password:
Public MailBox Print
-Hld=public:UserID::DocumentName
-Hld=public:UserID::
Proof Print