User's Manual

When you use XPS driver, click the Option tab, and then remove the check mark from Enable Bi-Directional
Communication check box.
Select any of the available trays from the Paper Tray Configuration.
2. Click Apply, and then click OK.
3. Close the displayed active dialog box.
When Using PS Driver
Windows 7/Windows 7
x64/Server 2008 R2 x64
1. Click Start® Devices and Printers.
2. Right-click the printer that uses the PS driver, and then select Printer
properties from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm the paper tray configuration
under Installable Options.
6. Close the Devices and Printers dialog box.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select any of the available trays from
the Paper Tray Configuration.
2. Click Apply, and then click OK.
3. Close the Devices and Printers dialog box.
Windows Vista/Vista x64
1. Click Start® Control Panel® Hardware and Sound® Printers.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm the paper tray configuration
under Installable Options.
6. Close the Printers dialog box.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select any of the available trays from
the Paper Tray Configuration
.
2. Click Apply, and then click OK.
3. Close the Printers dialog box.
Windows Server 2008/Server
2008 x64
1. Click Start® Control Panel® Printers.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm the paper tray configuration
under Installable Options.
6. Close the Printers dialog box.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select any of the available trays from
the Paper Tray Configuration.
2. Click Apply, and then click OK.
3. Close the Printers dialog box.
Windows XP/XP x64/Server
2003/Server 2003 x64
1. Click Start® Printers and Faxes.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm the paper tray configuration
under Installable Options.
6. Close the Printers and Faxes dialog box.