User's Manual

6. Adjust all straight lines to a value of 0. Preview image of before and after adjustment will help.
CAUTION: After printing the color registration chart, do not turn off the printer until the printer motor
has stopped running.
NOTE: If the straightest line does not line up perfectly with 0, then determine a value and adjust the color again.
Determining Values
From the lines to the right of the Y (Yellow), M (Magenta), and C (Cyan) pattern, find the values of the straightest lines.
NOTE: You can also use the densest colors of the lattice pattern to find the straightest lines. The colors printed at
the highest density are those next to the straightest lines. When 0 is the value nearest the straightest line, you do
not need to adjust the color registration. When the value is not 0, follow the procedure outlined in "
Entering
Values".
Entering Values
When Using the Operator Panel
Using the operator panel, enter the values that you found in the color registration chart to make adjustments.
1. Press Menu button.
2. Press button until Admin Menu is highlighted, and then press (Set) button.
3. Press
button until Maintenance is highlighted, and then press (Set) button.
4. Press
button until Color Reg Adj is highlighted, and then press (Set) button.
5. Press
button until Enter Number is highlighted, and then press (Set) button.
The first digit of the Enter Number (for LY, LM, and LC) is highlighted.
6. Press
or button until you reach the value (for example, +3) displayed on the chart.
7. Press
button once until the next value is highlighted.
When all values are entered, press
(Set) button.
The first digit of the Enter Number (for RY, RM, and RC) is highlighted.
8. Repeat
Step 6 and then press button once until the next value is highlighted.
When all values are entered, press
(Set) button.
9. Press
button until Color Regi Chart is highlighted, and then press (Set) button.
The color registration chart is printed with the new values.