User's Manual

Back to Contents Page
Removing Options
Removing the 550-Sheet Feeder
Removing the 1100-Sheet Feeder
Removing an Output Expander
Removing a Memory
Removing a Hard Disk
Removing the Wireless Adapter
If the printer location needs to change or the printer and print media handling options need to be shipped to a new
location, all print media handling options must be removed from the printer. For shipping, pack the printer and print
media handling options securely to avoid damage.
Removing the 550-Sheet Feeder
CAUTION: If you are removing the 550-sheet feeder, be sure to turn off the printer, unplug the power
cable, and disconnect all cables from the back of the printer before completing these tasks.
1. Turn off the printer and unplug the power cable. Then, disconnect all cables from the back of the printer.
2. Pull the tray out of the printer until it stops. Hold the tray with both hands, lift the front slightly, and remove it
from the printer.
3. Remove the plastic part and the two screws provided with the feeder by unscrewing them with a coin or similar
object.