User's Manual

4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm Output Expander is
available under Installable Options.
6. Close the Printers dialog box.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select Available for the Output
Expander under Installable Options.
2. Click Apply, and then click OK.
3. Close the Printers dialog box.
Windows Server 2008/Server
2008 x64
1. Click Start® Control Panel® Printers.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm Output Expander is
available under Installable Options.
6. Close the Printers dialog box.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select Available for the Output
Expander under Installable Options.
2. Click Apply, and then click OK.
3. Close the Printers dialog box.
Windows XP/XP x64/Server
2003/Server 2003 x64
1. Click Start® Printers and Faxes.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer
.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm Output Expander is
available under Installable Options.
6. Close the Printers and Faxes dialog box.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select Available for the Output
Expander under Installable Options.
2. Click Apply, and then click OK.
3. Close the Printers and Faxes dialog box.
Windows 2000
1. Click Start® Settings® Printers.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm Output Expander is
available under Installable Options.
6. Close the Printers dialog box.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select Available for the Output
Expander under Installable Options.
2. Click Apply, and then click OK.
3. Close the Printers dialog box.
Mac OS
®
X 10.5.x
1. Select the Print & Fax in System Preferences.
2. Select the printer in Printers list, and click Options & Supplies.
3.
Select Driver, select the options that have been installed on the printers, and
then click OK.
Mac OS X 10.3.x/10.4.x 1. Select the printer from the Printer List screen in Print Center (or Printer
Setup Utility).
2. Click Printers on the Print Center (or Printer Setup Utility) menu bar, and