User's Manual

c. Click the Printer Settings Report tab.
d. Select Reports.
e. Press the Start button in the Printer Settings.
The printer settings report is printed.
f. Verify if Hard Disk is listed in the printer settings under Printer Options.
If it is not listed, turn off the printer, unplug the power cable, and reinstall the hard disk.
NOTE: If you installed the hard disk after installing the PCL or PS printer driver, update your driver by following the
instructions for each operating system. If the printer is on a network, update the driver for each client.
To complete installation of the accessory, the printer driver must be updated to detect it.
NOTE: Hard disk can be specified on the printer driver only when HDD or RAM disk is available on the printer
driver.
NOTE: When you use XPS driver, the following settings are not required.
Updating Your Driver to Detect Hard Disk
When Using PCL/XPS Driver
NOTE: When you use XPS driver, the following settings are not required.
Windows 7/Windows 7 x64/Server 2008 R2
x64
1. Click Start® Devices and Printers.
2. Right-click the printer icon and select Printer properties.
3. Click the Options tab, and then select Get Information from
Printer.
4. Click Apply, and then click OK.
5. Close the Devices and Printers dialog box.
Windows Vista/Vista x64
1. Click Start® Control Panel® Hardware and Sound® Printers.
2. Right-click the printer icon and select Properties.
3. Click the Options tab, and then select Get Information from
Printer.
4. Click Apply, and then click OK.
5. Close the Printers dialog box.
Windows Server 2008/Server 2008 x64
1. Click Start® Control Panel® Printers.
2. Right-click the printer icon and select Properties.
3. Click the Options tab, and then select Get Information from
Printer.
4. Click Apply, and then click OK.
5. Close the Printers dialog box.
Windows XP/XP x64/Server 2003/Server 2003
x64
1. Click Start® Printers and Faxes.
2. Right-click the printer and select Properties.
3. Click the Options tab, and then select Get Information from
Printer.
4. Click Apply, and then click OK.
5. Close the Printers and Faxes dialog box.
Windows 2000
1. Click
Start® Settings® Printers.
2. Right-click the printer and select Properties.
3. Click the Options tab, and then select Get Information from
Printer.
4. Click Apply, and then click OK.
5. Close the Printers dialog box.