User's Manual

If the printer information is not updated automatically after clicking Get Information from Printer, follow these steps:
1. Click the Options tab, and then select Hard Disk on the Items list box.
2. Select Available for the hard disk setting.
3. Click Apply, and then click OK.
4. Close the displayed active dialog box.
When Using PS Driver
Windows 7/Windows 7
x64/Server 2008 R2 x64
1. Click Start® Devices and Printers.
2. Right-click the printer that uses the PS driver, and then select Printer
properties from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm the storage device on the
Installable Options.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select storage device from Storage
Device under Installable Options.
2. Click OK.
3. Close the Devices and Printers dialog box.
Windows Vista/Vista x64
1. Click Start® Control Panel® Hardware and Sound® Printers.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm the storage device on the
Installable Options.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select storage device from Storage
Device under Installable Options.
2.
Click OK.
3. Close the Printers dialog box.
Windows Server 2008/Server
2008 x64
1. Click Start® Control Panel® Printers.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm the storage device on the
Installable Options.
If you cannot acquire the printer information using the Get Information from
Printer automatically, try the following procedure:
1. Click the Device Settings tab, and then select storage device from Storage
Device under Installable Options.
2. Click OK.
3. Close the Printers dialog box.
Windows XP/XP x64/Server
2003/Server 2003 x64
1. Click Start® Printers and Faxes.
2. Right-click the printer that uses the PS driver, and then select Properties
from the displayed list.
3. Click the Configuration tab, and then select Get Information from Printer.
4. Click Apply, and then click OK.
5. Click the Device Settings tab, and then confirm the storage device on the
Installable Options.
If you cannot acquire the printer information using the Get Information from