Dell™ Inspiron™ 600m Owner’s Manual Model PP05L w w w. d e l l . c o m | s u p p o r t . d e l l .
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. If you purchased a Dell™ n Series computer, any references in this document to Microsoft® Windows® operating systems are not applicable.
Contents 1 A Tour of Your Computer Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Using Batteries and Module Bay Devices Using a Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery Performance . . . . . . . . . . . . Checking the Battery Charge . . . . . . . . Charging the Battery . . . . . . . . . . . . Removing a Battery . . . . . . . . . . . . . Installing a Battery . . . . . . . . . . . . . Removing and Installing a Reserve Battery Storing a Battery . . . . . . . . . . . . . . Power Problems . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using CDs, DVDs, and Other Multimedia Using CDs and DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 CD and DVD Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 If you cannot play a CD or DVD . . . . . . . . . . . . . If you cannot eject the CD, CD-RW, or DVD drive tray . If you hear an unfamiliar scraping or grinding sound . If the CD-RW drive stops writing . . . . . . . . . . . . Sound and Speaker Problems . . . . . . . . . . . 47 48 48 48 . . . . .
Video and Display Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . If the display is blank . . . . . . . . . If the display is difficult to read . . . . If only part of the display is readable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 70 . . . . . . . . . . . . . . . . . . . . . . .
9 Appendix Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 . . . . . . . . . . . . . . . . . . . . 95 95 96 Standard Settings Viewing the System Setup Screens System Setup Screens . . . . . . . Commonly Used Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dell Technical Support Policy (U.S. Only) . . . . . . . . . . . . . . . . . . . .
Contents
A Tour of Your Computer Front View display keyboard status lights mute button power button volume control buttons device status lights keyboard touch pad buttons touch pad speaker display latch speaker — For more information about your display, see the Dell Inspiron help file. To access the help file, see "Accessing Help" on page 65. DISPLAY — Press the power button to turn on the computer or exit a power management mode.
www.dell.com | support.dell.com DEVICE STATUS LIGHTS Turns on when you turn on the computer and blinks when the computer is in a power management mode. Turns on when the computer reads or writes data. NOTICE: To avoid loss of data, never turn off the computer while the light is flashing. Turns on steadily or blinks to indicate battery charge status. Turns on when Bluetooth® wireless technology is enabled.
If the computer is connected to an electrical outlet, the – Solid green: The battery is charging. – Flashing green: The battery is almost fully charged. light operates as follows: If the computer is running on a battery, the light operates as follows: – Off: The battery is adequately charged (or the computer is turned off). – Flashing orange: The battery charge is low. – Solid orange: The battery charge is critically low. — The keyboard includes a numeric keypad as well as the Windows logo key.
www.dell.com | support.dell.com The green lights located above the keyboard indicate the following: 9 Turns on when the numeric keypad is enabled. A Turns on when the uppercase letter function is enabled. Turns on when the scroll lock function is enabled. Left Side View PC Card slot smart card slot security cable slot infrared sensor hard drive air vents (2) audio connectors (2) — The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating.
— Supports one smart card. For more information, see the Dell Inspiron help file. To access the help file, see "Accessing Help" on page 65. SMART CARD SLOT NOTE: Depending on your computer’s configuration, the smart card slot may not be available. — Lets you transfer files from your computer to another infrared-compatible device without using cable connections. INFRARED SENSOR When you receive your computer, the sensor is disabled. You can use the system setup program to enable the sensor.
www.dell.com | support.dell.com HARD DRIVE — Stores software and data. — Lets you attach a commercially available antitheft device to the computer. For more information, see the instructions included with the device. SECURITY CABLE SLOT NOTICE: Before you buy an antitheft device, ensure that it will work with the security cable slot. Right Side View security cable slot module bay device latch release — Lets you attach a commercially available antitheft device to the computer.
— You can install devices such as an optical drive or a Dell TravelLite™ module in the module bay. For more information, see "About the Module Bay" on page 36. MODULE BAY DEVICE LATCH RELEASE — Releases the module bay device. See "About the Module Bay" on page 36 for instructions. Back View NOTICE: To avoid damaging the computer, wait 5 seconds after turning off the computer before you disconnect an external device. CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents.
www.dell.com | support.dell.com USB C O N N E C T O R S Connect USB devices, such as a mouse, keyboard, or printer. You can also connect the optional floppy drive directly to a USB connector using the optional floppy drive cable. S - V I D E O TV- O U T C O N N E C T O R Connects your computer to a TV. For more information, see "Connecting a Television to the Computer" on page 50. MODEM CONNECTOR (RJ-11) If you ordered the internal modem, connect the telephone line to the modem connector.
NETWORK CONNECTOR (RJ-45) NOTICE: The network connector is slightly larger than the modem connector. To avoid damaging the computer, do not plug a telephone line into the network connector. Connects the computer to a network. The green and yellow lights next to the connector indicate activity for both wired and wireless network communications. For information on using the network adapter, see the device user’s guide supplied with your computer. See "Accessing Help" on page 65.
www.dell.com | support.dell.com A C A D A P T E R C O N N E C T O R — Attach an AC adapter to the computer. The AC adapter converts AC power to the DC power required by the computer. You can connect the AC adapter with your computer turned either on or off. CAUTION: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries.
Bottom View battery-bay latch release memory module cover battery charge gauge battery hard drive Mini PCI card cover fan docking device slot MEMORY MODULE COVER — Covers the compartment that contains the memory module(s). See "Adding Memory" on page 81. BATTERY-BAY LATCH RELEASE BATTERY CHARGE GAUGE — Releases the battery. See "Using a Battery" on page 29 for instructions. — Provides information on the battery charge. See "Using a Battery" on page 29.
A Tour of Your Computer www.dell.com | support.dell.
Setting Up Your Computer Connecting to the Internet NOTE: ISPs and ISP offerings vary by country. To connect to the Internet, you need a modem or network connection and an Internet service provider (ISP), such as AOL or MSN. Your ISP will offer one or more of the following Internet connection options: • Dial-up connections that provide Internet access through a phone line. Dial-up connections are considerably slower than DSL and cable modem connections.
www.dell.com | support.dell.com 4 In the next window, click the appropriate option: • If you do not have an ISP and want to select one, click Choose from a list of Internet service providers (ISPs). • If you have already obtained setup information from your ISP but you did not receive a setup CD, click Set up my connection manually. • If you have a CD, click Use the CD I got from an ISP. 5 Click Next. If you selected Set up my connection manually, continue to step 6.
TU R N O F F C A L L W A I T I N G ( C A T C H - P H O N E ) — See your telephone directory for instructions on deactivating this feature. Then adjust the dial-up networking connection properties. 1 Click the Start button and click Control Panel. 2 Click Printers and Other Hardware, click Phone and Modem Options, click the Dialing Rules tab, and then click Edit....
www.dell.com | support.dell.com Connecting a Parallel Printer 1 Complete the operating system setup, if you have not already done so. 2 Shut down the computer (see "Turning Off Your Computer" on page 27). NOTICE: For best results, use a 3-m (10-ft) or shorter parallel cable. 3 Attach the parallel printer cable to the parallel connector on the computer and tighten the two screws. Attach the cable to the connector on the printer and snap the two clips into the two notches.
Connecting a USB Printer NOTE: You can connect USB devices while the computer is turned on. 1 Complete the operating system setup if you have not already done so. 2 Install the printer driver if necessary. See the documentation that came with your printer. 3 Attach the USB printer cable to the USB connectors on the computer and the printer. The USB connectors fit only one way.
www.dell.com | support.dell.com Setting Up the Docking Device to Connect to a Network NOTE: A network adapter is also referred to as a network interface controller (NIC). NOTICE: Do not install a network adapter or a network adapter/modem combination PC Card until you complete the docking device setup. NOTICE: To prevent serious operating system problems, do not connect your computer to a docking device until the Windows operating system setup on the computer is complete.
Uninterruptible Power Supplies NOTICE: Loss of power while data is being saved to the hard drive may result in data loss or file damage. NOTE: To ensure maximum battery operating time, connect only your computer to a UPS. Connect other devices, such as a printer, to a separate power strip that provides surge protection. A UPS protects against power fluctuations and interruptions. UPS devices contain a battery that provides temporary power to connected devices when AC power is interrupted.
Setting Up Your Computer www.dell.com | support.dell.
Using Batteries and Module Bay Devices Using a Battery Battery Performance CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. Use a battery to power the computer when the computer is not connected to an electrical outlet. One battery is supplied as standard equipment in the battery bay. NOTE: Battery operating time (the time it can hold a charge) decreases over time.
www.dell.com | support.dell.com CAUTION: Misuse of the battery may increase the risk of fire or chemical burn. Do not puncture, incinerate, disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away from children. Handle damaged or leaking batteries with extreme care. Damaged batteries may leak and cause personal injury or equipment damage.
Health Gauge The battery operating time is largely determined by the number of times it is charged. After hundreds of charge and discharge cycles, batteries lose some charge capacity, or battery health. To check the battery health, press and hold the status button on the battery charge gauge for at least 3 seconds. If no lights appear, the battery is in good condition, and more than 80 percent of its original charge capacity remains. Each light represents incremental degradation.
www.dell.com | support.dell.com Charging the Battery NOTE: The AC adapter charges a completely discharged battery in approximately 1 hour with the computer turned off. Charge time is longer with the computer turned on. You can leave the battery in the computer as long as you like. The battery internal circuitry prevents the battery from overcharging.
Installing a Battery CAUTION: Before you begin any of the procedures in this section, read the safety instructions in your Product Information Guide. CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only with a compatible battery purchased from Dell. The lithium-ion battery is designed to work with your Dell™ computer. Do not use a battery from other computers with your computer. Slide the battery into the bay until the latch release clicks.
www.dell.com | support.dell.com Removing and Installing a Reserve Battery CAUTION: Before you begin any of the procedures in this section, read the safety instructions in your Product Information Guide. NOTE: If your computer does not use a reserve battery, it uses a coin-cell battery. The coin-cell battery is not a replaceable part. 1 See "Removing a Battery" on page 32. 2 Remove the reserve battery cover.
4 Connect the reserve battery cable to the connector in the reserve battery compartment. 5 Place the reserve battery in the compartment, and replace the reserve battery cover. Storing a Battery Remove the battery when you store your computer for an extended period of time. A battery discharges during prolonged storage. After a long storage period, recharge the battery fully before you use it.
www.dell.com | support.dell.com If the battery status light rapidly flashes orange, the battery may be defective. See "Contacting Dell" on page 100. TE S T T H E E L E C T R I C A L O U T L E T — Ensure that the electrical outlet is working by testing it with another device, such as a lamp. C H E C K T H E AC A D A P T E R — Check the AC adapter cable connections. If the AC adapter has a light, ensure that the light is on.
status button on the battery charge gauge second battery (bottom) Removing and Installing Devices While the Computer Is Turned Off CAUTION: Before you begin any of the procedures in this section, read the safety instructions in your Product Information Guide. NOTICE: To prevent damage to devices, place them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them.
www.dell.com | support.dell.com 2 Pull the device by the latch release to remove the device from the module bay. 3 Insert the new device into the bay, push the device until you feel a click, and push the device latch release in so that it is flush with the computer. Removing and Installing Devices While the Computer Is Running CAUTION: Before you begin any of the procedures in this section, read the safety instructions in your Product Information Guide.
device latch release 5 Pull the device by the latch release to remove the device from the module bay. 6 Insert the new device into the bay, push the device until you feel a click, and push the device latch release in so that it is flush with the computer. Windows XP automatically recognizes the new device. 7 If necessary, enter your password to unlock your computer.
www.dell.com | support.dell.
Using the Keyboard and Touch Pad Numeric Keypad NOTE: When you connect an external keyboard or keypad to the computer, the keypad is disabled. NOTE: You can change options for using the numeric keypad in the system setup program. The keypad numbers and symbols are marked in blue on the right side of the keypad keys. To type a number or symbol, press to enable the numeric keypad, and then hold down and press the desired key. FILE LOCATION: C:\data\Temp\Benz\T8109c42.
FILE LOCATION: C:\data\Temp\Benz\T8109c42.fm www.dell.com | support.dell.com Keyboard Shortcuts System Functions Opens the Windows Task Manager window. Enables and disables the numeric keypad. Enables and disables the scroll lock. Battery Displays the Dell™ QuickSet Battery Meter. CD or DVD Tray Ejects the tray out of the drive.
FILE LOCATION: C:\data\Temp\Benz\T8109c42.fm Power Management Activates the power management mode of your choice. You can program this keyboard shortcut on the Advanced tab in the Power Options Properties window. Speaker Functions If no sound comes from the speakers, press and adjust the volume. Increases the volume of the integrated speakers and external speakers, if attached.
FILE LOCATION: C:\data\Temp\Benz\T8109c42.fm www.dell.com | support.dell.com To adjust keyboard operation, such as the character repeat rate, open the Control Panel, and click Printers and Other Hardware. Touch Pad The touch pad detects the pressure and movement of your finger to allow you to move the cursor on the display. Use the touch pad and touch pad buttons as you would use a mouse. touch pad touch pad buttons • To move the cursor, lightly slide your finger over the touch pad.
FILE LOCATION: C:\data\Temp\Benz\T8109c42.fm Customizing the Touch Pad You can disable the touch pad or adjust their settings by using the Mouse Properties window. 1 Click the Start button, click Control Panel, and then double-click the Mouse icon. 2 On the Mouse Properties window: • Click the Device Select tab to disable the touch pad. • Click the Pointer tab to adjust touch pad settings. 3 Select the desired settings and click Apply. 4 Click OK to save the settings and close the window.
FILE LOCATION: C:\data\Temp\Benz\T8109c42.fm www.dell.com | support.dell.com TO V E R I F Y T H A T T H E P R O B L E M I S W I T H T H E E X T E R N A L K E Y B O A R D , C H E C K T H E I N T E G R A T E D KEYBOARD — 1 Turn off the computer. 2 Disconnect the external keyboard. 3 Turn on the computer. 4 From the Windows desktop, click the Start button, point to All Programs, point to Accessories, and click Notepad.
Using CDs, DVDs, and Other Multimedia Using CDs and DVDs For information about using CDs and DVDs in your computer, see the Dell Inspiron help file. To access the help file, see "Accessing Help" on page 65. CD and DVD Problems If you cannot play a CD or DVD NOTE: Because of different worldwide file types, not all DVD titles work in all DVD drives. High-speed CD drive vibration is normal and may cause noise. This noise does not indicate a defect with the drive or the CD.
www.dell.com | support.dell.com If you cannot eject the CD, CD-RW, or DVD drive tray 1 Ensure that the computer is shut down and turned off (see page 27). 2 Straighten a paper clip and insert one end into the eject hole at the front of the drive; push firmly until the tray is partially ejected. 3 Gently pull out the tray until it stops. If you hear an unfamiliar scraping or grinding sound • Ensure that the sound is not caused by the program that is running.
TE S T T H E S P E A K E R S — Plug the speaker audio cable into the line-out connector on the computer. Ensure that the headphone volume control is turned up. Play a music CD. R U N T H E S P E A K E R S E L F - T E S T — Some speaker systems have a self-test button on the subwoofer. See the speaker documentation for self-test instructions. E L I M I N A T E P O S S I B L E I N T E R F E R E N C E — Turn off nearby fans, fluorescent lights, or halogen lamps to check for interference.
www.dell.com | support.dell.com Using Blank CD-Rs and CD-RWs Your CD-RW drive can write to two different types of recording media—CD-Rs and CD-RWs. Use blank CD-Rs to record music or permanently store data files. After creating a CD-R, you cannot write to that CD-R again without changing your method of recording (see the Sonic documentation for more information). Use blank CD-RWs to write to CDs or to erase, rewrite, or update data on CDs.
The audio connector on the side of the computer enables you to connect the computer to your television or audio device, using a commercially available audio cable. When you complete the cable connection, see "Enabling the Display Settings for a Television" on page 55 to ensure that the computer recognizes and works properly with the television.
www.dell.com | support.dell.com 3 Plug the other end of the S-video cable into your television. 4 Plug the single-connector end of the audio cable into the headphone connector on your computer. 5 Plug the two RCA connectors on the other end of the audio cable into the audio input connectors on your television or audio device. 6 Turn on the television, turn on any audio device you connected, and then turn on the computer.
Composite Video Connection To connect the computer to a television that has a composite video input only, Dell provides a composite TV-out adapter cable.
www.dell.com | support.dell.com 1 Turn off the computer and the television and/or audio device you want to connect. 2 Connect the composite TV-out adapter cable to the S-video TV-out connector on the computer. S-video TV-out connector S-video connector composite video connector composite TV-out adapter cable 3 Plug one end of the composite video cable into the composite video connector on the composite TV-out adapter cable.
Enabling the Display Settings for a Television ATI Video Controller NOTE: Ensure that you properly connect the television before you enable the display settings. 1 To open the Control Panel window, click the Start button and then click the Control Panel icon. 2 Double-click the Display icon, click the Settings tab, and then click Advanced. 3 Click the Displays tab. 4 Click the upper-left corner of the TV button to enable the television.
www.dell.com | support.dell.
Setting Up a Home and Office Network Connecting to a Network Adapter Before you connect your computer to a network, the computer must have a network adapter installed and a network cable connected to it. To connect a network cable: 1 Connect the network cable to the network adapter connector on the back of your computer. NOTE: Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.
www.dell.com | support.dell.com Network Setup Wizard The Microsoft® Windows® XP operating system provides a Network Setup Wizard to guide you through the process of sharing files, printers, or an Internet connection between computers in a home or small office. 1 Click the Start button, point to All Programs→ Accessories→ Communications, and then click Network Setup Wizard. 2 On the welcome screen, click Next. 3 Click Checklist for creating a network.
infrastructure network ad-hoc network Connecting to a Wireless Network in Microsoft® Windows® XP Your wireless network card requires specific software and drivers in order to connect to a network. The software is already installed. If the software is removed or corrupted, follow the instructions included in the user's guide for your wireless network card. The user’s guide is available on the Dell Support website at support.dell.com.
www.dell.com | support.dell.com 2 Click to select the network you want to configure, and then click Connect or double-click the network name in the list. If you select a secure network (identified by a icon), you must enter a WEP or WPA key when prompted. NOTE: Network security settings are unique to your network. Dell cannot provide this information. Your network is configured automatically. NOTE: Your computer can take up to 1 minute to connect to the network.
Thereafter, whenever you log on to your computer in the area of the wireless network, the same pop-up notifies you of the wireless network connection.
www.dell.com | support.dell.
Solving Problems Finding Solutions Sometimes it’s difficult to figure out where to go for answers. Use this chart to quickly find the answers to your questions. NOTE: If you have a problem with an external device, see the device documentation or contact the manufacturer. See page 35. Press the power button to resume from standby mode. See the Dell Inspiron help file for more information on standby mode. See page 65. Get technical assistance from Dell. See page 65. ® See page 65.
www.dell.com | support.dell.com See page 66. See page 48. See page 25. See page 22. See page 68. See page 45. See page 45. See page 46. See page 68 See page 58. See page 65. See page 71. See page 21. See page 23. See page 73.
Accessing Help TO A C C E S S T H E D E L L I N S P I R O N H E L P F I L E — 1 Click the Start button and click Help and Support. 2 Click User and system guides and click User’s guides. 3 Click Dell Inspiron Help TO A C C E S S H E L P — 1 Click the Start button and click Help and Support. 2 Type a word or phrase that describes your problem and click the arrow icon. 3 Click the topic that describes your problem. 4 Follow the instructions shown on the screen.
www.dell.com | support.dell.com A R E Q U I R E D . D L L F I L E W A S N O T F O U N D — The program that you are trying to open is missing an essential file. Remove and then reinstall the program. 1 Click the Start button. 2 Click Control Panel. 3 Click Add or Remove Programs. 4 Select the program you want to remove. 5 Click Remove or Change/Remove and follow the prompts on the screen. 6 See the program documentation for installation instructions. X:\ IS NOT ACCESSIBLE.
C O N N E C T T H E C O M P U T E R D I R E C T L Y T O A N E L E C T R I C A L O U T L E T — Bypass power protection devices, power strips, and the extension cable to verify that the computer turns on. To access the help file, see "Accessing Help" on page 65. A D J U S T T H E P O W E R P R O P E R T I E S — Search for the keyword standby in the Help and Support Center. For instructions on accessing help files, see "Accessing Help" on page 65.
www.dell.com | support.dell.com If only part of the display is readable CONNECT AN EXTERNAL MONITOR — 1 Turn off your computer and connect an external monitor to the computer. 2 Turn on the computer and the monitor, and adjust the monitor brightness and contrast controls. If the external monitor works, the computer display or video controller may be defective. Contact Dell ("Contacting Dell" on page 100).
E N S U R E T H A T T H E D I S K I S N O T W R I T E - P R O T E C T E D — You cannot save data to a write-protected disk. See the following figure. back of floppy disk write-protected not write-protected TR Y A N O T H E R F L O P P Y D I S K — Insert another disk to eliminate the possibility that the original disk is defective. REINSTALL THE DRIVE — 1 Save and close any open files, exit any open programs, and shut down the computer. 2 Remove the drive from the module bay.
www.dell.com | support.dell.com If you have problems with a hard drive A L L O W T H E C O M P U T E R T O C O O L B E F O R E T U R N I N G I T O N — A hot hard drive may prevent the operating system from starting. Try allowing the computer to return to room temperature before turning it on. CHECK THE DRIVE FOR ERRORS — 1 Click the Start button and click My Computer. 2 Right-click the drive letter (local disk) that you want to scan for errors, and then click Properties. 3 Click the Tools tab.
General Program Problems A program crashes NOTE: Software usually includes installation instructions in its documentation or on a floppy disk or CD. S E E T H E S O F T W A R E D O C U M E N T A T I O N — Many software manufacturers maintain websites with information that may help you solve the problem. Ensure that you properly installed and configured the program. Reinstall the program if necessary. A program stops responding END THE PROGRAM — 1 Simultaneously press .
www.dell.com | support.dell.com 6 Wipe off the battery and put it in a safe place to dry. 7 Remove the hard drive (see "Replacing the Hard Drive" on page 86). 8 Remove the memory module(s) (see "Adding Memory" on page 81). 9 Open the display and place the computer right-side up across two books or similar props to let air circulate all around it. Let the computer dry for at least 24 hours in a dry area at room temperature.
Resolving Other Technical Problems G O T O T H E D E L L S U P P O R T W E B S I T E — Go to support.dell.com for help with general usage, installation, and troubleshooting questions. See "Dell Technical Support Policy (U.S. Only)" on page 98 for a description of the hardware and software support provided by Dell. E - M A I L D E L L — Go to support.dell.com and then click E-Mail Dell in the Communicate list.
www.dell.com | support.dell.com Identifying Drivers If you experience a problem with any device, identify whether the driver is the source of your problem and, if necessary, update the driver. 1 Click the Start button and click Control Panel. 2 Under Pick a Category, click Performance and Maintenance. 3 Click System. 4 In the System Properties window, click the Hardware tab. 5 Click Device Manager.
Manually Reinstalling Drivers for Windows XP NOTE: If you are reinstalling an infrared sensor driver, you must first enable the infrared sensor in the system setup program (see "System Setup Screens" on page 95) before continuing with the driver installation. 1 After copying the required driver files to your hard drive, click the Start button and right-click My Computer. 2 Click the Start button and right-click My Computer. 3 Click Properties. 4 Click the Hardware tab and click Device Manager.
www.dell.com | support.dell.com Creating a Restore Point 1 Click the Start button and click Help and Support. 2 Click System Restore. 3 Follow the instructions on the screen. Restoring the Computer to an Earlier Operating State If problems occur after you install a device driver, use Device Driver Rollback (see page 75) to resolve the problem. If that is unsuccessful, then use System Restore.
Enabling System Restore If you reinstall Windows XP with less than 200 MB of free hard-disk space available, System Restore is automatically disabled. To see if System Restore is enabled: 1 Click the Start button and click Control Panel. 2 Click Performance and Maintenance. 3 Click System. 4 Click the System Restore tab. 5 Ensure that Turn off System Restore is unchecked. Using Dell PC Restore by Symantec NOTE: Dell PC Restore is available only on computers purchased in certain regions.
www.dell.com | support.dell.com 6 When prompted, click Yes. The computer restarts. Because the computer is restored to its original operating state, the screens that appear, such as the End User License Agreement, are the same ones that appeared the first time the computer was turned on. 7 Click Next. The System Restore screen appears and the computer restarts. 8 After the computer restarts, click OK.
3 Click the Hardware tab and click Device Manager. 4 In the Device Manager list, check for conflicts with the other devices. Conflicts are indicated by a yellow exclamation point (!) beside the conflicting device or a red X if the device has been disabled. 5 Double-click any conflict to display the Properties window. If an IRQ conflict exists, the Device status area in the Properties window reports the cards or devices that share the device's IRQ.
Solving Problems www.dell.com | support.dell.
Adding and Replacing Parts Adding Memory You can increase your computer memory by installing memory modules on the system board. See "Specifications" on page 89 for information on the memory supported by your computer. Be sure to add only memory modules that are intended for your computer. CAUTION: Before working inside your Dell™ computer, read the safety instructions in the Product Information Guide. NOTE: Memory modules purchased from Dell are covered under your computer warranty.
www.dell.com | support.dell.com NOTICE: To prevent damage to the memory module connector, do not use tools to spread the inner metal tabs that secure the memory module. 6 If you are replacing a memory module, remove the existing module. NOTICE: Handle memory modules by their edges, and do not touch the components on a module. a Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up. b Remove the module from the connector.
9 Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet. 10 Turn on the computer. As the computer boots, it detects the additional memory and automatically updates the system configuration information. Adding a Mini PCI Card CAUTION: FCC rules strictly prohibit users from installing 5-GHz (802.11a, 802.11a/b, 802.11a/b/g) Wireless LAN Mini PCI cards. Under no circumstances should the user install such a device.
www.dell.com | support.dell.com 6 Turn the computer over, and remove the screw from the Mini PCI card cover. 7 Place your finger under the cover at the indentation, and lift and slide the cover open.
8 If a Mini PCI card is not already installed, go to step 9. If you are replacing a Mini PCI card, remove the existing card: a Disconnect the Mini PCI card from any attached cables. b Release the Mini PCI card by spreading the metal securing tabs until the card pops up slightly. c Lift the Mini PCI card out of its connector. 9 Align the new Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI card into the connector.
www.dell.com | support.dell.com Replacing the Hard Drive CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive. CAUTION: Before working inside your computer, read the safety instructions in the Product Information Guide. NOTICE: To prevent data loss, shut down your computer (see "Turning Off Your Computer" on page 27) before removing the hard drive.
7 Turn the computer over so that it is upright. NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging. See your Product Information Guide for safety instructions. 8 Pull the hard drive cover out of the computer. 9 Remove the new drive from its packaging. Save the original packaging for use when storing or shipping the hard drive. NOTICE: You cannot replace your hard drive unless you open your display first. 10 Ensure that the display is open approximately 2.
Adding and Replacing Parts www.dell.com | support.dell.
Appendix Specifications Microprocessor Microprocessor type Intel® L1 cache 32 KB (internal) L2 cache: 1.3 GHz to 1.7 GHz 1MB 1.
www.dell.com | support.dell.com Smart Card NOTE: Depending on your computer’s configuration, the smart card slot may not be available.
Ports and Connectors (continued) S-video TV-out 7-pin mini-DIN connector (optional S-video to composite video adapter cable) Mini PCI Type IIIA Mini PCI card slot Modem RJ-11 port Network adapter RJ-45 port Communications Modem: Type v.92 56K MDC Controller softmodem Interface internal AC’97 bus Network adapter 10/100/1000 Ethernet LAN on system board Wireless internal Mini PCI Wi-Fi (802.11b and 802.
www.dell.com | support.dell.com Audio (continued) Interfaces: Internal AC’97 External microphone miniconnector, stereo headphones/speakers miniconnector Speaker two 4-ohm speakers Internal speaker amplifier 2-W channel into 4 ohms Volume controls keyboard shortcuts or program menus Display Type (active-matrix TFT) XGA or SXGA+ Dimensions: Height 214.3 mm (8.4 inches) Width 285.7 mm (11.3 inches) Diagonal 357.1 mm (14.1 inches) Maximum resolutions 1024 x 768 at 16.
Keyboard Number of keys 87 (U.S. and Canada); 88 (Europe); 91 (Japan) Key travel 2.7 mm ± 0.3 mm (0.11 inch ± 0.016 inch) Key spacing 19.05 mm ± 0.3 mm (0.75 inch ± 0.012 inch) Layout QWERTY/AZERTY/Kanji Touch Pad X/Y position resolution (graphics table mode) 240 cpi Size: Width 64.88-mm (2.55-inch) sensor-active area Height 48.88-mm (1.92-inch) rectangle Battery Type 6 cell, "smart" lithium ion (48 WHr); 4 cell, "smart" lithium ion (32 WHr) Dimensions: Depth 77.5 mm (3.
www.dell.com | support.dell.com AC Adapter Input voltage 90–264 VAC Input current (maximum) 1.7 A Input frequency 47–63 Hz Output current 5.5 A (maximum at 4-second pulse); 4.5 A (continuous) Output power 90 W or 65 W Rated output voltage 19.5 VDC Dimensions: Height 27.94 mm (1.1 inches) Width 58.42 mm (2.3 inches) Depth 133.85 mm (5.25 inches) Weight (with cables) 0.4 kg (0.
Environmental (continued) Maximum vibration (using a random-vibration spectrum that simulates user environment): Operating 0.66 GRMS Storage 1.30 GRMS Maximum shock (measured with hard drive in head-parked position and a 2-ms half-sine pulse): Operating 122 G Storage 163 G Altitude (maximum): Operating –15.2 to 3048 m (–50 to 10,000 ft) Storage –15.
www.dell.com | support.dell.com The screens display such information as: • System configuration • Boot order • Boot (start-up) configuration and docking-device configuration settings • Basic device configuration settings • Battery charge status • System security and hard-drive password settings Commonly Used Options Certain options require that you reboot the computer for new settings to take effect.
Performing a One-Time Boot You can set a one-time-only boot sequence without entering the system setup program. (You can also use this procedure to boot the Dell Diagnostics on the diagnostics utility partition on your hard drive.) 1 Shut down the computer. 2 Connect the computer to an electrical outlet. 3 Turn on the computer. When the DELL logo appears, press immediately. If you wait too long and the Windows logo appears, continue to wait until you see the Windows desktop.
www.dell.com | support.dell.com After you enable the infrared sensor, you can use it to establish a link to an infrared device. To set up and use an infrared device, see the infrared device documentation and the Windows Help and Support Center. Dell Technical Support Policy (U.S.
FCC Notices (U.S. Only) Most Dell computers are classified by the Federal Communications Commission (FCC) as Class B digital devices. To determine which classification applies to your computer, examine all FCC registration labels located on the bottom, side, or back panel of your computer, on cardmounting brackets, and on the cards themselves. If any one of the labels carries a Class A rating, your entire computer is considered to be a Class A digital device.
www.dell.com | support.dell.com • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. FCC Identification Information The following information is provided on the device or devices covered in this document in compliance with FCC regulations: • Model number: PP05L • Company name: Dell Inc.
Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers Anguilla General Support toll-free: 800-335-0031 Antigua and Barbuda General Support 1-800-805-5924 Argentina (Buenos Aires) Website: www.dell.com.ar International Access Code: 00 E-mail: us_latin_services@dell.com Country Code: 54 E-mail for desktop and portable computers: la-techsupport@dell.
www.dell.com | support.dell.com Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers Austria (Vienna) Website: support.euro.dell.com International Access Code: 900 E-mail: tech_support_central_europe@dell.
Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers Brunei Customer Technical Support (Penang, Malaysia) 604 633 4966 Country Code: 673 Customer Service (Penang, Malaysia) 604 633 4949 Transaction Sales (Penang, Malaysia) 604 633 4955 Canada (North York, Ontario) Online Order Status: www.dell.
www.dell.com | support.dell.com Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address China (Xiamen) Technical Support website: support.dell.com.cn Country Code: 86 Technical Support E-mail: cn_support@dell.com City Code: 592 Customer Care E-mail: customer_cn@dell.
Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers Czech Republic (Prague) Website: support.euro.dell.com International Access Code: 00 E-mail: czech_dell@dell.com Country Code: 420 Technical Support 22537 2727 Customer Care 22537 2707 Fax 22537 2714 Tech Fax 22537 2728 Switchboard 22537 2711 Denmark (Copenhagen) Website: support.euro.dell.
www.dell.com | support.dell.com Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers France (Paris) (Montpellier) Website: support.euro.dell.com International Access Code: 00 E-mail: support.euro.dell.
Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers Greece Website: support.euro.dell.com International Access Code: 00 E-mail: support.euro.dell.
www.dell.com | support.dell.com Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers Ireland (Cherrywood) Website: support.euro.dell.com International Access Code: 16 E-mail: dell_direct_support@dell.com Country Code: 353 Technical Support for Inspiron XPS computers only 1850 200 722 City Code: 1 Technical Support for all other Dell computers 1850 543 543 U.K.
Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Japan (Kawasaki) Website: support.jp.dell.
www.dell.com | support.dell.com Country (City) International Access Code Country Code City Code Latin America Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers Customer Technical Support (Austin, Texas, U.S.A.) 512 728-4093 Customer Service (Austin, Texas, U.S.A.) 512 728-3619 Fax (Technical Support and Customer Service) (Austin, Texas, U.S.A.) 512 728-3883 Sales (Austin, Texas, U.S.A.) 512 728-4397 SalesFax (Austin, Texas, U.S.A.
Country (City) International Access Code Country Code City Code Mexico Department Name or Service Area, Website and E-Mail Address Customer Technical Support International Access Code: 00 Country Code: 52 Area Codes, Local Numbers, and Toll-Free Numbers 001-877-384-8979 or 001-877-269-3383 Sales 50-81-8800 or 01-800-888-3355 Customer Service 001-877-384-8979 or 001-877-269-3383 Main 50-81-8800 or 01-800-888-3355 Montserrat General Support toll-free: 1-866-278-6822 Netherlands Antilles General
www.dell.com | support.dell.com Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers Nicaragua General Support 001-800-220-1006 Norway (Lysaker) Website: support.euro.dell.com International Access Code: 00 E-mail: support.euro.dell.
Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers Singapore (Singapore) Website: support.ap.dell.
www.dell.com | support.dell.com Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers Spain (Madrid) Website: support.euro.dell.com International Access Code: 00 E-mail: support.euro.dell.
Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers Taiwan Website: support.ap.dell.com International Access Code: 002 E-mail: ap_support@dell.
www.dell.com | support.dell.com Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers U.K. (Bracknell) Website: support.euro.dell.com International Access Code: 00 Customer Care website: support.euro.dell.com/uk/en/ECare/Form/Home.asp Country Code: 44 City Code: 1344 Uruguay 116 E-mail: dell_direct_support@dell.
Country (City) International Access Code Country Code City Code Department Name or Service Area, Website and E-Mail Address Area Codes, Local Numbers, and Toll-Free Numbers U.S.A.
Appendix www.dell.com | support.dell.
Index A air vents description, 12, 18 system view, 12, 18 audio connectors description, 13 system view, 13 B battery charge gauge, 30 charging, 32 checking the charge, 30 description, 19 health gauge, 31 installing, 33 low-battery warning, 31 performance, 29 power meter, 30 removing, 32 storing, 35 system view, 19 C CD or DVD tray using, 37 characters unexpected, 46 computer crashes, 71 restore to previous state, 75 specifications, 89 conflicts drivers, 74 resolving software and hardware incompatibilitie
Index H hard drive description, 14, 19 preventing damage, 87 replacing, 86 system view, 14, 19 keyboard status lights description, 11 system view, 11 keypad numeric, 41 hardware drivers, 73 L Hardware Troubleshooter, 78 line conditioners, 26 help file accessing, 65 I infrared sensor description, 13 system view, 13 Internet connection about, 21 options, 21 setting up, 21 IR sensor See infrared sensor IRQ conflicts, 78 K keyboard description, 11 fixing problems, 46 shortcuts, 42 system view, 11
problems restore to previous state, 75 programs crashes, 71 fixing problems, 71 not responding, 71 R reinstalling drivers, 74 Windows XP, 75 Restoring, 75 S-video TV-out connector description, 16 system view, 16 System Restore, 75 system setup program commonly used options, 96 screens, 95 viewing, 95 system specifications, 89 T S touch pad customizing, 45 description, 11 system view, 11 security cable slot description, 14 system view, 14 touch pad buttons description, 11 system view, 11 serial conne
Index 122 Index
