User`s manual

Internet  15
Un-mounting the SD card
1. Tap → Settings→ Storage.
2. Tap Unmount→ OK to remove the SD card.
CAUTION: It is ecommended that you unmount the SD card before removing it.
Removing the SD card while it is in use may cause data loss or result in application
errors.
Erasing all data from your tablet
CAUTION: Performing these steps erases all data, including your personal information
and downloaded applications from your tablet. Make sure that you back up all the
required data before you proceed.
1. Tap → Settings→ Backup & reset→ Factory data reset.
2. Tap Reset tablet.
3. Read the warning and tap Erase everything.
Internet
You can connect your tablet to Wi-Fi networks to access the Internet. If you purchase a
LTE/HSPA+ model, you can also connect to the Internet using various mobile broadband
standards such as GPRS, EDGE, 3G, LTE, HSPA+, and so on.
Connecting to the Internet using Wi-Fi
NOTE: The range and quality of the Wi-Fi signal is affected by the distance between the
tablet and the wireless router,the number of connected devices, infrastructure, and objects
through which the signal is transmitted.
1. Tap → Settings→ Wireless & networks→ Wi-Fi.
2. Enable Wi-Fi by moving the slider to On position. The tablet scans for Wi-Fi networks in
range.
3. Tap the network you want to connect to.
4. Type a password (if connecting to a secure network) and tap Connect to connect to the
selected Wi-Fi network.