User's Manual

Print Media Guidelines

Cables

YourDell™All-In-One Printer 810 uses a Universal Serial Bus (USB) cable (sold separately).
Operating system
Processor
RAM (MB)
Hard disk (MB)
Windows 2000
Pentium 233
128
500
Windows XP
Pentium 300
128
500
Windows XP Professional x64 Edition
Windows XP Professional x64 Edition-compatible PC
256
500
Load up to:
Make sure:
100 sheets of plain paper
l The paper is loaded vertically against the right side of the paper support.
l The paper guide rests against the left edge of the paper.
NOTE: Load letterhead paper with the top of the letterhead entering the printer first and facing up.
l You select Automatic, Draft, Normal, or Photo print quality.
20 sheets of banner paper
l You remove any paper from the paper support before inserting banner paper.
l You place a stack of banner paper on or behind the printer, with only the number of sheets required.
NOTE: You must select A4 Banner or Letter Banner paper size in Printing Preferences. Failure to do so will cause a paper
jam. See Paper Problems.
l You load the leading edge of the banner paper into the printer against the right side of the paper support.
l The paper guide rests against the left edge of the paper.
l You use banner paper designed for inkjet printers.
10 envelopes
l The print side of the envelopes faces up.
l The envelopes are loaded vertically against the right side of the paper support.
l The stamp location is in the upper left corner and printed with landscape orientation.
NOTE: For Japanese customers: If you are mailing within Japan, the envelope can be printed with portrait orientation with the
stamp in the lower right corner or with landscape orientation with the stamp in the lower left corner. If you are mailing
internationally, print landscape orientation with the stamp in the upper left corner.
l The paper guide rests against the left edge of the envelopes.
l You select the correct envelope size. Select the next biggest size if the exact envelope size is not listed, and set the left
and right margins so that your envelope text will be correctly positioned.
25 greeting cards, index
cards, postcards, or photo
cards
l The print side of the cards faces up.
l The cards are loaded vertically against the right side of the paper support.
l The paper guide rests against the left edge of the cards.
l You select Automatic, Draft, Normal, or Photo print quality.
50 sheets of photo or
glossy paper
l The glossy side of the paper faces up.
l The paper is loaded vertically against the right side of the paper support.
l The paper guide rests against the left edge of the paper.
l You select Automatic, Draft, Normal, or Photo print quality.
10 iron-on transfers
l You follow the loading instructions on the packaging.
l The blank side of the transfer faces up.
l The transfers are loaded vertically against the right side of the paper support.
l The paper guide rests against the left edge of the transfers.
l You select Automatic, Normal, or Photo print quality.
NOTE: For best results, iron-on transfers should be fed one sheet at a time.
25 transparencies
l The rough side of the transparencies faces up.
l The transparencies are loaded vertically against the right side of the paper support.
l The paper guide rests against the left edge of the transparencies.
NOTE: You can load a single transparency into the paper support without removing plain paper.
l You select Automatic, Draft, Normal, or Photo print quality.