Manual

Back to Contents Page
Battery(s)
AdamoXPS™ServiceManual
Removing the Computer Battery
Replacing the Computer Battery
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Removing the Bridge Battery
Replacing the Bridge Battery
Removing the Computer Battery
1. Follow the instructions in Before You Begin.
2. Turn the computer over.
3. Slide and hold the battery release latch.
4. Using the grip on the computer battery, push the computer battery towards the computer and rotate it upwards.
5. Lift the computer battery out of the computer.
Replacing the Computer Battery
1. Follow the instructions in Before You Begin.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Computer Battery) before working inside
the computer.
CAUTION: Toavoiddamagetothecomputer,useonlythebatterydesignedforthisparticularDell™computer.Donotusebatteriesdesignedfor
other Dell computers.
1
grip
2
battery release latch
3
computer battery