Manual


16. Lift the system board at an angle towards the side of the computer and out of the computer base.
Replacing the System Board

1. Follow the instructions in Before You Begin.

2. Place the system board on the computer base.

3. Replace the two screws that secure the system board to the computer base.

4. Connect the following cables to their corresponding connectors on the system board:
l thermal fan cable
l display cable
l left I/O board cable
l battery power cable
l AC adapter power cable
l right I/O board cable

5. Route the antenna cables and tape them in place if required.

1
thermal fan cable connector
2
display cable connector
3
left I/O board cable connector
4
battery power cable connector
5
AC adapter power cable connector
6
right I/O board cable connector
7
screws (2)