Manual


2. Align the computer battery in the battery bay.

3. Rotate the battery into the computer until it snaps in place.
Removing the Coin-Cell Battery

1. Follow the instructions in Before You Begin.

2. Remove the computer battery (see Removing the Computer Battery).

3. Open the display (see Opening the Display).

4. Remove the palm rest assembly (see Removing the Palm Rest Assembly).

5. Disconnect the coin-cell battery cable from the connector on the system board.

6. The coin-cell battery is glued to the system board. Using a plastic scribe pry the coin-cell battery out of the system board.
Replacing the Coin-Cell Battery

1. Follow the instructions in Before You Begin.

2. Use the adhesive on the coin-cell battery and adhere it to the system board.

3. Connect the coin-cell battery cable to the connector on the system board.

4. Replace the palm rest assembly (see Replacing the Palm Rest Assembly).

5. Replace the computer battery (see Replacing the Computer Battery).

Removing the Bridge Battery

1. Follow the instructions in Before You Begin.

2. Remove the computer battery (see Removing the Computer Battery).

3. Open the display (see Opening the Display).

1
coin-cell battery connector
2
coin-cell battery
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.