Manual


1. Follow the instructions in Before You Begin.

2. Place the left daughter board on the base of the computer.

3. Replace the two screws that secure the left daughter board to the computer base.

4. Connect the touch pad cable, speaker cable, and the bridge battery cable to the connectors on the left daughter board.

5. Connect the left daughter board cable to the connectors on the system board and the left daughter board.

6. Replace the palm rest assembly (see Replacing the Palm Rest Assembly).

7. Replace the computer battery (see Replacing the Computer Battery).

Removing the Right Daughter Board

1. Follow the instructions in Before You Begin.

2. Remove the computer battery (see Removing the Computer Battery).

3. Open the display (see Opening the Display).

4. Remove the palm rest assembly (see Removing the Palm Rest Assembly).

5. Remove the solid state drive (see Removing the Solid State Drive).

6. Remove the Bluetooth card (see Removing the Bluetooth Card).

7. Remove the WLAN card (see Removing the WLAN Card).

8. Disconnect the right daughter board cable from the connector on the system board.

9. Lift and slide the right daughter board away from the computer.
Replacing the Right Daughter Board

1. Follow the instructions in Before You Begin.

2. Slide and place the right daughter board towards the edge of the computer.

3. Connect the right daughter board cable to the connector on the system board.

4. Replace the WLAN card (see Replacing the WLAN Card).

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
1
right daughter board cable
2
right daughter board