Manual

4. Remove the palm rest assembly (see Removing the Palm Rest Assembly).

5. Disconnect the bridge battery cable from the connector on the left daughter board.

6. The bridge battery is glued to the base cover. Using a plastic scribe pry the bridge battery out of the base cover.
Replacing the Bridge Battery

1. Follow the instructions in Before You Begin.

2. Use the adhesive on the bridge battery and adhere it to the base cover.

3. Connect the bridge battery cable to the connector on the left daughter board.

4. Replace the palm rest assembly (see Replacing the Palm Rest Assembly).

5. Replace the computer battery (see Replacing the Computer Battery).

Back to Contents Page

1
bridge battery connector
2
bridge battery
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.