Service Manual

Steps

1. Remove the two screws (M2x3) that secure the power-adapter port bracket to the palm-rest assembly.

2. Lift the power-adapter port bracket off the palm-rest assembly.

3. Lift the power-adapter port along with its cable off the palm-rest assembly.

Installing the power-adapter port

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the power-adapter port and provides a visual representation of the installation

procedure.

Steps

1. Place the power-adapter port into the slot on the palm-rest assembly.

2. Place the power-adapter port bracket on the power-adapter port.

3. Replace the two screws (M2x3) that secure the power-adapter port bracket to the palm-rest assembly.