Service Manual

Keyboard

Removing the keyboard

Prerequisites

1. Follow the procedure in

Before working inside your computer.

2. Remove the base cover.

3. Remove the 2230 solid-state drive. (if applicable)

4. Remove the

2280 solid-state drive. (if applicable)

5. Remove the rear I/O-cover.

6. Remove the battery.

7. Remove the

coin-cell battery.

8. Remove the left I/O-board.

9. Remove the right I/O-board.

10.Remove the system board.

11. Remove the power-button assembly.

About this task

The following image indicates the location of the keyboard and provides a visual representation of the removal procedure.