User's Manual

Wireless network setup
Click Next. After searching, the window shows the wireless network devices. Select
6 8
the name (SSID) of the access point you are using and click Next.
If you cannot find the network name you want to choose, or if you want to
set the wireless configuration manually, click (Plus) button.
• Enter the wireless Network Name: Enter the SSID of access point you
want (SSID is case-sensitive).
• Operation Mode: Select Infrastructure.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
7
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on WPA Pre-Shared Key. This uses a shared secret key
(generally called Pre- Shared Key pass phrase) which is manually
configured on the access point and each of its clients.
If the search has failed, you may check if the USB cable is properly connected
• Encryption: Select the encryption (None, WEP64, WEP128, TKIP, AES,
TKIP AES).
• Network Key: Enter the encryption network key value.
• Confirm Network Key: Confirm the encryption network key value.
• WEP Key Index: If you are using WEP Encryption, select the appropriate
WEP Key Index.
The software searches the wireless network.
between the computer and machine, and follow the instructions on the
window.
2. Using a Network-Connected Machine
159