User's Manual

1
2
3
4
5
6
7
8
9
10
11
Wireless network setup
Access point via USB cable
When you set the wireless configuration manually, click Advanced Setting.
• Enter the wireless Network Name: Enter the SSID of the access point
Check whether the USB cable is connected to the machine.
(SSID is case-sensitive).
Turn on your computer, access point, and machine.
• Operation Mode: Select Infrastructure.
• Authentication: Select an authentication type.
Insert the supplied software CD into your CD/DVD drive.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Double-click the CD/DVD icon that appears on your Mac desktop.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
Double-click the MAC_Installer folder > Installer OS X icon.
WPA Personal or WPA2 Personal: Select this option to authenticate the
print server based on the WPA Pre-Shared Key. This uses a shared secret
Click Continue.
key (generally called Pre Shared Key pass phrase) that is manually
configured on the access point and each of its clients.
Read the license agreement and click Continue.
• Encryption: Select the encryption. (None, WEP64, WEP128, TKIP, AES,
TKIP, AES)
Click Agree to agree to the license agreement.
When the message that warns that all applications will close on your
computer appears, click Continue.
Click Wireless Network Setting button on the User Options Pane.
After searching, the window shows the wireless network devices. Select
the name (SSID) of the access point you are using and click Next.
2. Using a Network-Connected Machine
164