User's Manual

System setup

Network setup

Option Description

Wireless Selects this option to use the wireless network.

Clear Setting

Reverts the network settings to the default values.

(Reboot required.)

• Network Conf.

• Network

Configuration

This list shows information on your machine’s network

connection and configuration.

Net. Activate You can sets whether to use Ethernet on or off.

Some menus may not appear in the display depending on options or

models. If so, it is not applicable to your machine (see "Menu overview" on

page 29).

• Press (Menu)> Network on the control panel,

• Or press Setup > Machine Setup > Network Setup .

Option Description

TCP/IP (IPv4)

Selects the appropriate protocol and configure

parameters to use the network environment.

There are lots of parameters to be set. If you are

not sure, leave as is, or consult the network

administrator.

TCP/IP (IPv6)

Selects this option to use the network environment

through IPv6 (see "IPv6 configuration" on page 146).

Ethernet Speed Configure the network transmission speed.

802.1x

You can selects the user authentication for network

communication. For detailed information consult the

network administrator.

3. Useful Setting Menus

201