User's Manual

Printing features

Change other printing options in each tab, if necessary. Open the Unified Driver Configurator.

7 1

If necessary, switch to Printers configuration.

Click Print.

Select your machine on the available printers list and click Properties.

Automatic/manual duplex printing may not be available depending on

The Printer Properties window appears.

models. You can alternatively use the lpr printing system or other

applications for odd-even printing.

The following five tabs display at the top of the window:

• General: Allows you to change the printer location and name. The

name entered in this tab displays on the printer list in Printers

configuration.

Printing files

• Connection: Allows you to view or select another port. If you change

You can print many different types of files on your machine using the standard

the machine port from USB to parallel or vice versa while in use, you

CUPS, directly from the command line interface. The CUPS lpr utility allows you

must re-configure the machine port in this tab.

to do that. You can print these files by using the command format below.

• Driver: Allows you to view or select another machine driver. By

lp -d <printer name> -o <option> <file name>

clicking Options, you can set the default device options.

Please refer to lp or man page on your system for more details.

• Jobs: Shows the list of print jobs. Click Cancel job to cancel the

selected job and select the Show completed jobs check box to see

previous jobs on the job list.

Configuring Printer Properties

• Classes: Shows the class that your machine is in. Click Add to Class

to add your machine to a specific class or click Remove from Class

Using the Printer Properties window provided by the Printers configuration,

to remove the machine from the selected class.

you can change the various properties for your machine as a printer.

Click OK to apply the changes and close the Printer Properties window.

4. Special Features

221