User's Manual

Media and tray

Using the output support Preparing originals

• Do not load paper smaller than 142 x 148 mm (5.6 x 5.8 inches) or larger than

216 x 356 mm (8.5 x 14 inches).

of pages at once. Make sure that you do not touch the surface, and do not

• Do not attempt to load the following paper in order to prevent paper jam,

allow children near it.

low print quality and machine damage.

- Carbon-paper or carbon-backed paper

The printed pages stack on the output support, and the output support will help

- Coated paper

the printed pages to align. The printer sends output to the output tray by

- Onion skin or thin paper

default.

- Wrinkled or creased paper

- Curled or rolled paper

- Torn paper

• Remove all staples and paper clips before loading.

• Make sure any glue, ink, or correction fluid on the paper is completely dry

before loading.

• Do not load originals that include different sizes or weights of paper.

• Do not load booklets, pamphlets, transparencies, or documents with other

unusual characteristics.

The surface of the output tray may become hot if you print a large number

Illustrations on this user’s guide may differ from your machine depending

on its options or models. Check your machine type (see "Front view" on

page 18).

2. Menu Overview and Basic Setup