User's Manual

Basic faxing
Enter the destination fax number (see "Keypad letters and numbers" on
4
page 204).
Press
(Start) on the control panel. The machine starts to scan and
5
send the fax to the destinations.
• If you want to send a fax directly from your computer, use Dell Network
PC Fax (see "Sending a fax in the computer" on page 231).
• When you want to cancel a fax job, press (Stop/Clear) before the
machine starts transmission.
• If you used the scanner glass, the machine shows the message asking to
place another page.
Sending a fax manually
Perform the following to send a fax using (On Hook Dial) on the control
panel.
If your machine is a handset model, you can send a fax using the handset
(see "Variety feature" on page 7).
Place a single document face down on the document glass, or load the
1
documents face up into the document feeder (see "Loading originals" on
page 46).
Select (fax) on the control panel.
2
Adjust the resolution and the darkness to suit your fax needs (see
3
"Adjusting the document settings" on page 63).
Press (On Hook Dial) on the control panel or lift the handset.
4
Enter a fax number using the number keypad on the control panel.
5
Press (Start) on the control panel when you hear a high-pitched fax
6
signal from the remote fax machine.
2. Menu Overview and Basic Setup
61