Owner's Manual

DELL CONFIDENTIAL – PRELIMINARY 10/23/13 – FOR PROOF ONLY
Benutzerinformation gemäß der Vergabegrundlage für das Umweltzeichen
Blauer Engel (RAL-UZ171)
Energy data
Information on the Device Dell B2375dnf
Electric power consumption of a device depends both on its characteristics
and on the way you use it. Your device is designed and pre-set so that you can
save electricity costs. It switches over to the mode "ready" after the last copy.
From there, the device can immediately start printing again if required. If not
required, the device switches over to electric power saving modes in two steps
after a certain time, which is called activation time. In these modes, it
consumes less power (watt). The device will take some more time to print
again from an electric power saving mode than from the mode "ready". This
delay is called return time, which is quite long for some devices. The device
Dell B2375dnf, however, fulfills the strict Blue Angel requirements for the
return time (http://www.blauer-engel.de). It only takes 6.68 seconds, for
example, to return from warm start mode to ready mode for printing. This is
only a short moment for you but will help you to save electricity and hence
operating costs if the device is pausing (hence, during no-load operation).
The device is so designed in such a way that switching it on and off up to
twice a day to the plug-in off mode will not cause damage.
B2375dnf.fm Page 17 Wednesday, October 23, 2013 2:42 PM