Instruction Manual

5 Under the Location heading, select Network Folder, and then configure the location settings.
6 Under the Authentication Options heading, select Use Kerberos authentication. The Kerberos credentials from
Smart Card Authentication Client will be used to access the network destination.
Notes:
• This option is visible if the location is set to Network Folder.
• If you select this option, then make sure that Use MFP authentication credentials is also selected.
7 In the sections that follow, adjust the settings.
• Select check boxes to allow users to modify settings.
• Use radio buttons and drop‑down menus to specify the default settings.
8 Under the File heading, in the Name field, type a default base name for the scan file. The file extension is generated
automatically according to the value of the Format field in the Scan Settings section.
9 Click OK, and then click Apply.
10 Secure access to Scan to Network using Smart Card Authentication Client.
On printers running the Embedded Solutions Framework (eSF) version 3.0 or later:
a Make sure that you have created a security template that uses Smart Card Authentication Client to obtain user
credentials. See
“Setting up a security template” on page 8.
b From the Embedded Web Server, click Settings > Security > Security Setup.
c From Step 3 under the Advanced Security Setup heading, click Access Controls.
d If necessary, expand the Device Solutions folder.
e From the Scan to Network drop‑down menu, select your security template.
f Click Submit.
On printers running eSF version 2.0:
a Access the Application Access Manager application configuration settings from the Embedded Web Server.
b From the Scan to Network drop‑down menu, select Smart Card Authentication Client.
c Click Apply.
Note: If you are unsure about which version of eSF your printer is running, then see
“Checking which version of
the Embedded Solutions Framework is installed on a printer” on page 44.
For more information about configuring Scan to Network, see the Scan to Network and Scan to Network Premium
Administrator’s Guide.
Configuring the applications 20