Instruction Manual

Using the applications
Using Secure Scan To E-mail
Note: If manual login is enabled, then the “Wait for user information” option must be selected in the Smart Card
Authentication Client application configuration settings. See
“Configuring advanced settings” on page 14. This
ensures that a manual login user’s e‑mail address is stored in the login session and is available for use with Secure
Scan To E‑mail. If this option is not selected, then manual login users cannot send e‑mail to themselves
automatically. The “Send me a copy” option will not be available.
Sending secure e‑mail
Note: You can return to the printer home screen if you want to cancel the sending of the e‑mail.
1 Load the document into the printer.
Note: Documents may be loaded into the Automatic Document Feeder (ADF) or on the scanner glass. For
information on the different methods of loading documents, see the User’s Guide that came with the printer.
2 From the printer home screen, touch the application icon.
3 If prompted, enter your authentication credentials.
4 Use the keyboard to type an e‑mail address, or search the address book. Select Send me a copy if you want to
automatically send a copy of the e‑mail to yourself.
5 Touch Next Address to add additional recipients.
6 When you are done adding recipients, touch E‑mail It.
7 If prompted, select whether to digitally sign the e‑mail, encrypt the e‑mail, or do both. Leave both options cleared
to send an unsigned, unencrypted e‑mail.
Note: Depending on how the application is configured, you may see only one option, or you may not see this
prompt at all.
8 If prompted, enter your PIN or password for sending digitally signed e‑mail.
9 To digitally sign e‑mail, you must have a valid digital signing certificate. If a signing certificate error message appears,
then follow the instructions on the screen:
• If the message “No signing certificate is available to sign your e‑mail” appears, then touch Next to send the e‑mail
without a digital signature, or return to the home screen to cancel the sending of the e‑mail.
• If the message “The e‑mail cannot be sent because your signing certificate could not be found” appears, then
you will need to obtain a signing certificate, or the application will need to be configured to allow you to send
unsigned e‑mail.
Using the applications 23