Users Guide
Table Of Contents
- Revision History
- Table of Contents
- Regulatory and Safety Approvals
- Functional Description
- Network Link and Activity Indication
- Features
- Software and Hardware Features
- Virtualization Features
- VXLAN
- NVGRE/GRE/IP-in-IP/Geneve
- Stateless Offloads
- UDP Fragmentation Offload
- Stateless Transport Tunnel Offload
- Multiqueue Support for OS
- SR-IOV Configuration Support Matrix
- SR-IOV
- Network Partitioning (NPAR)
- RDMA over Converged Ethernet – RoCE
- Supported Combinations
- Installing the Hardware
- Software Packages and Installation
- Windows Driver Advanced Properties and Event Log Messages
- Teaming
- System-level Configuration
- ISCSI Boot
- VXLAN: Configuration and Use Case Examples
- SR-IOV: Configuration and Use Case Examples
- NPAR – Configuration and Use Case Example
- RoCE – Configuration and Use Case Examples
- DCBX – Data Center Bridging
Installing the HardwareNetXtreme-E User’s Manual
September 4, 2019 • NetXtreme-E-UG103 Page 33
Copper
The BCM957406AXXXX, BCM957416AXXXX, and BCM957416XXXX adapters have two RJ-45 connectors
used for attaching the system to a CAT 6E Ethernet copper-wire segment.
SFP+
The BCM957402AXXXX, BCM957412AXXXX, and BCM957412MXXXX adapters have two SFP+ connectors
used for attaching the system to a 10 Gbps Ethernet switch.
SFP28
The BCM957404AXXXX, BCM957414XXXX, and BCM957414AXXXX adapters have two SFP28 connectors
used for attaching the system to a 100 Gbps Ethernet switch.
FTLX8574D3BCL-FC
or
PLRXPLSCS43811
WTRD1 BCM57402X, BCM57404X,
BCM57412X, BCM57414X
10 Gbps-SR SFP+ Transceiver
SFP+ to 1000BASET
Tranceiver
XTY28 BCM57412X, BCM57414X SFP+ to 1000BASET Tranceiver
SFP+ to 10GBASET
Tranceiver
PGYJT BCM57412X, BCM57414X SFP+ to 10GBASET Tranceiver
Note:
1. Direct Attach Cables (DAC) that conform to IEEE standards can be connected to the adapter.
2. Dell part HHHHC and N8TDR are required for the BCM957414M4140D.
Table 20: Supported Cables and Modules (Cont.)
Optical Module Dell Part Number Adapters Description