Users Guide
Table Of Contents
- Revision History
- Table of Contents
- Regulatory and Safety Approvals
- Functional Description
- Network Link and Activity Indication
- Features
- Software and Hardware Features
- Virtualization Features
- VXLAN
- NVGRE/GRE/IP-in-IP/Geneve
- Stateless Offloads
- UDP Fragmentation Offload
- Stateless Transport Tunnel Offload
- Multiqueue Support for OS
- SR-IOV Configuration Support Matrix
- SR-IOV
- Network Partitioning (NPAR)
- RDMA over Converged Ethernet – RoCE
- Supported Combinations
- Installing the Hardware
- Software Packages and Installation
- Windows Driver Advanced Properties and Event Log Messages
- Teaming
- System-level Configuration
- ISCSI Boot
- VXLAN: Configuration and Use Case Examples
- SR-IOV: Configuration and Use Case Examples
- NPAR – Configuration and Use Case Example
- RoCE – Configuration and Use Case Examples
- DCBX – Data Center Bridging
System-level ConfigurationNetXtreme-E User’s Manual
September 4, 2019 • NetXtreme-E-UG103 Page 44
Refer to “ISCSI Boot” on page 54 for detailed configuration information.
Comprehensive Configuration Management
Preboot configuration can be configured using the Comprehensive Configuration Management (CCM) menu
option. During the system BIOS POST, the Broadcom banner message will be displayed with an option to
change the parameters through the Control-S menu. When Control-S is pressed, a device list will be populated
with all the Broadcom network adapters found in the system. Select the desired NIC for configuration.
Device Hardware Configuration
Parameters that can be configured using this section are the same as the HII menu "Device level configuration".
MBA Configuration Menu
Parameters that can be configured using this section are the same as HII menu "NIC configuration".
iSCSI Boot Main Menu
Parameters that can be configured using this section are same as HII menu "iSCSI configuration".