Users Guide
Table Of Contents
- Revision History
- Table of Contents
- Regulatory and Safety Approvals
- Functional Description
- Network Link and Activity Indication
- Features
- Software and Hardware Features
- Virtualization Features
- VXLAN
- NVGRE/GRE/IP-in-IP/Geneve
- Stateless Offloads
- UDP Fragmentation Offload
- Stateless Transport Tunnel Offload
- Multiqueue Support for OS
- SR-IOV Configuration Support Matrix
- SR-IOV
- Network Partitioning (NPAR)
- RDMA over Converged Ethernet – RoCE
- Supported Combinations
- Installing the Hardware
- Software Packages and Installation
- Windows Driver Advanced Properties and Event Log Messages
- Teaming
- System-level Configuration
- ISCSI Boot
- VXLAN: Configuration and Use Case Examples
- SR-IOV: Configuration and Use Case Examples
- NPAR – Configuration and Use Case Example
- RoCE – Configuration and Use Case Examples
- DCBX – Data Center Bridging
NPAR – Configuration and Use Case ExampleNetXtreme-E User’s Manual
September 4, 2019 • NetXtreme-E-UG103 Page 70
4. Set the NIC Partition Configuration parameters (see Table 41 on page 70).
Table 41: NPAR Parameters
Parameter Description Valid Options
BW Reservation Percentage of total available bandwidth that should be reserved for
this partition. 0 indicates equal division of bandwidth between all
partitions.
Value 0-100
BW Limit Maximum percentage of available bandwidth this partition is allowed. Value 0-100
BW Reservation Valid Functions as an on/off switch for the BW Reservation setting. True/False
BW Limit Valid Functions as an on/off switch for the BW Limit setting. True/False
Support RDMA Functions as an on/off switch for RDMA support on this partition.
Please note, only two partitions per physical port can support RDMA.
For a dual port device, up to 4 NPAR partitions can support RDMA.
Enabled/Disabled
MAC Address MAC Address for this partition. –