Users Guide
Table Of Contents
- Revision History
- Table of Contents
- Regulatory and Safety Approvals
- Functional Description
- Network Link and Activity Indication
- Features
- Software and Hardware Features
- Virtualization Features
- VXLAN
- NVGRE/GRE/IP-in-IP/Geneve
- Stateless Offloads
- UDP Fragmentation Offload
- Stateless Transport Tunnel Offload
- Multiqueue Support for OS
- SR-IOV Configuration Support Matrix
- SR-IOV
- Network Partitioning (NPAR)
- RDMA over Converged Ethernet – RoCE
- Supported Combinations
- Installing the Hardware
- Software Packages and Installation
- Windows Driver Advanced Properties and Event Log Messages
- Teaming
- System-level Configuration
- ISCSI Boot
- VXLAN: Configuration and Use Case Examples
- SR-IOV: Configuration and Use Case Examples
- NPAR – Configuration and Use Case Example
- RoCE – Configuration and Use Case Examples
- DCBX – Data Center Bridging
Regulatory and Safety ApprovalsNetXtreme-E User’s Manual
September 4, 2019 • NetXtreme-E-UG103 Page 8
Electromagnetic Compatibility (EMC)
Electrostatic Discharge (ESD) Compliance
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Table 3: Electromagnetic Compatibility
Standard / Country Certification Type Compliance
CE/EU EN 55032:2012/AC:2013 Class B
EN 55024:2010
EN 61000-3-2:2014
EN 61000-3-3:2013
CE report and CE DoC
FCC/USA CFR47, Part 15 Class B FCC/IC DoC and EMC report
referencing FCC and IC standards
IC/Canada ICES-003 Class B FCC/IC DoC and report referencing
FCC and IC standards
ACA/Australia, New Zealand AS/NZS CISPR 22:2009 +A1:2010/
AS/NZS CISPR 32:2015
ACA certificate
RCM Mark
BSMI/Taiwan CNS13438 Class B BSMI certificate
BSMI/Taiwan CNS15663 BSMI certificate
MIC/S. Korea KN32 Class B
KN35
Korea certificate
MSIP Mark
VCCI/Japan V-3/2014/04 (take effect 3/31/2015) Copy of VCCI on-line certificate
Table 4: ESD Compliance Summary
Standard Certification Type Compliance
EN55024:2010
(EN 61000-4-2)
Air/Direct discharge Yes
Note: Changes or modifications not expressly approved by the manufacture responsible for
compliance could void the user’s authority to operate the equipment.