Quick Reference Guide

94 Brocade Adapters Installation and Reference Manual
53-1002144-01
Using software installation scripts and system commands
3
9. Verify installation by launching the Device Manager to display all installed devices.
• For CNAs, HBAs, and Fabric Adapters, when you expand the list of SCSI and RAID
controllers or Storage controllers an instance of the adapter model should display for
adapter port installed.
• For CNAs and Fabric Adapter ports configured in CNA or NIC mode, when you expand
Network adapters, an instance of Brocade 10G Ethernet Adapter should also display for
each port installed.
For example, if two two-port CNAs (total of four ports) are installed, four instances of the
adapter model display (two under SCSI and RAID controllers and two under Network adapters).
As another example, if only one port on a Fabric Adapter is configured in CNA or NIC mode, two
instances of the adapter model display (one under SCSI and RAID controllers and one under
Network adapters).
10. If device instances do not display and instead instances display with yellow question marks
under Other Devices, scan the Device Manager for hardware changes. To scan, right click on
any device in the list and select Scan for hardware changes.
After you scan for changes, the adapter should display in the Device Manager as described
under step 9.
11. If necessary, start the HCM Agent using steps under “HCM Agent operations” on page 112.
NOTE
Manually installing the driver package does not automatically start the HCM Agent.
12. When the driver is installed and the host system is connected to the fabric turn on host power
and verify adapter operation. Verify proper LED operation for stand-up adapters by referring to
“Adapter LED operation (stand-up adapters)” on page 184.
Command examples
Following are examples of using the brocade_install.bat command to install driver packages on
Windows systems.
• Install all drivers
brocade_install.bat
• Install all drivers in silent mode
brocade_install.bat SILENT_INSTALL=TRUE
• Uninstall all drivers
brocade_install.bat INSTALL_OP=UNINSTALL
• Install the Fibre Channel (storage) driver only
brocade_install.bat DRIVER_TYPE=HBA
• To uninstall FC driver only
brocade_install.bat INSTALL_OP=UNINSTALL DRIVER_TYPE=HBA
• Forcefully install the drivers
brocade_install.bat FORCED_INSTALL=TRUE
• Override the installed hotfix with a new hotfix