Manual

Loading Paper

209

Loading an Envelope in Trays 1 to 4

The following describes the procedures to load an envelope in Trays 1 to 4.

Raise the latch on the handle of the right hand

cover to open the cover.

Press down the lever to set the envelope mode.

Note • If you insert media other than envelopes, lift

up the lever.

• To load envelopes using the optional Finisher-

AB1, raise the lever as shown in the

illustration.

• To load print media other than envelopes

using the optional Finisher-AB1, check if the

lever is pulled down as shown in the

illustration.