Manual

Loading Paper

213

When Loading Envelope#10, Monarch, or

When Loading C5

Note • Never use envelopes with window, coated

linings, or self-stick adhesives. These lead to

paper jams and can cause damage to the

printer.

• Ensure that you load an envelope with the flap

completely closed.

• If you do not load envelopes in the Tray 5 right

after they have been removed from the

packaging, they may bulge. To avoid jams,

flatten them as shown below when loading

them in the Tray 5.

• If envelopes are still not fed correctly, add

some bending to the lead edge of the

envelopes as shown in the following

illustration.

• The amount of the bending should be 5 mm or

less.

Using the Tray 5

• Load only one size and type of print media during a single print job.

• Do not add or remove print media when there is still print media in the Tray 5 or when

the machine is printing from the Tray 5. This may result in a paper jam.

• Print media should be loaded with the recommended print side down and the top of the

print media going into the machine first.

• Do not place objects on the Tray 5. Also, avoid pressing down or applying excessive force

on it.