Manual

13 Maintenance
226
14 Remove the cleaning pad by pressing the amber
gold tabs between your thumb and index finger.
15 Unpack a new cleaning pad.
16 Attach the new cleaning pad to the cleaning
rod.
17 Insert the cleaning rod fully into one of the four
holes until it clicks into the interior of the
machine as shown in the illustration, and then
pull it out.
18 Repeat step 17 also on the other three holes. One time insertion is enough for each hole.
19 Return the cleaning rod to its original location.
20 Close the front cover.
Note • If the front cover is not closed completely, a
message appears and the machine will remain
paused.