Manual

Status Code
607
060-310
061-340
061-346
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
062-277
[Cause] A communication error occurred between the document scanning unit and the
document feeder.
[Remedy] Contact Customer Support at dell.com/contactdell.
062-311
062-345
062-360
062-362
062-371
062-380
062-386
062-389
062-393
062-395
062-396
062-397
062-398
[Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
062-790
[Cause] Copying of the scanned document is prohibited.
[Remedy] Refer to "Legal Notice" (P.28).
072-310
072-311
[Cause] An error occurred in Tray 2.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
073-310
073-311
[Cause] An error occurred in Tray 3.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
074-310
074-311
[Cause] An error occurred in Tray 4.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
077-322
077-323
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
077-327
[Cause] Five or more tray modules are installed.
[Remedy] You can install up to four optional tray modules in the machine. Remove the
unnecessary tray module.
091-312
[Cause] An error occurred in the machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact Customer
Support at dell.com/contactdell.
Status Code Cause and Remedy