Manual

22 Problem Solving
628
Stapler Faults
This section describes how to clear stapler troubles when the optional finisher is installed.
Perform the procedures on the following pages when copies are not stapled or staples are
bent. Contact Customer Support at dell.com/contactdell if the problem persists after you
have tried the following solutions.
If copies are stapled as shown in the figures below, contact Customer Support at
dell.com/contactdell.
Unstapled
Bent Staple
One side of staple rising up
Staple bent in reverse direction
Flattened staple
Entire staple rising up
Staple rising up with
center pressed in