Tech Sheet

DELL CONFIDENTIAL – PRELIMINARY 9/20/13 – FOR PROOF ONLY
User Information Per Blue Angel Mark Requirements of RAL-UZ171
Energy data
Information on the Device Dell™ C7765dn Color Multifunction Printer
Electric power consumption of a device depends both on its characteristics
and on the way you use it. Your device is designed and pre-set so that you can
save electricity costs. It switches over to the mode "ready" after the last copy.
From there, the device can immediately start printing again if required. If not
required, the device switches over to electric power saving modes in two steps
after a certain time, which is called activation time. In these modes, it
consumes less power (watt). The device will take some more time to print
again from an electric power saving mode than from the mode "ready". This
delay is called return time, which is quite long for some devices. The device
Dell™ C7765dn Color Multifunction Printer, however, fulfills the strict Blue
Angel requirements for the return time (http://www.blauer-engel.de). It only
takes 5 seconds, for example, to return from Energy saving mode 2 to ready
mode for printing. This is only a short moment for you but will help you to
save electricity and hence operating costs if the device is pausing (hence,
during no-load operation).
The device is so designed in such a way that switching it on and off up to
twice a day to the plug-in off mode will not cause damage.
Power consumption and default times
of Dell C7765dn Color Multifunction Printer
during time elapsed after last print
time (min.)
Time elapsed after last printing = idle mode [minutes]
1
0
power consumption (W)
50
print mode
Energy saving mode 2 (2.5W)
Ready mode (55W)
40
10
30
20